[ I?igo Lopez Barranco writes: ] > The only strange thing is that in Motorola's schematics says that > pins 3 and 5 of the Micrel 2025 are Not Connected and 4 is GND, and > Micrel's 2025 datasheet says that 3 is GND and 4 and 5 NC. Then, in > the Lite5200 GND pin 3 is connected to GND through an 1k resistor, > instead of directly as I suppose they pretended in the schematic, and
That is correct and an error in our Lite5200 layout. Thanks for the feedback. We are replacing R164 with a 0 Ohm resistor. Our Total5200 platform does not share this problem. -- David Wolfe Digital Audio, Radio & Telematics Freescale Semiconductor ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
