Dear David,
in message <200310141057.00186.david.jander at protonic.nl> you wrote:
>
> I have heared that the BDI2000 is a must-have debugger for Embedded-PPC
> development (we are developing a MPC852T based board).
> Questions:
> What can you do with the BDI2000 as a Jtag interface for the MPC852T?
MPC8xx processors use a BDM interface. The BDI2000 attaches to this
BDM port.
> Is it possible (i.e. is there software) to use the BDI2000 as a Jtag interface
> for that processor to also do hardware testing?
This depends on what you mean by "hardware testing". Of course you
can use the BDM interface - for example - to download and run some
test programs to test your hardware. But BDM is all you get.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
We are drowning in information but starved for knowledge.
-- John Naisbitt, Megatrends
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
