Hi, in message <20020704170753.14420.qmail at webmail14.rediffmail.com> you wrote: > > My kernel serial driver for 8260 is able to give bash > prompt but its not able to read anything from serial console,bash > prompt is not at all responding
What do ypu expect from me? To guess what you're doing wrong? > when i attach the interrupts its gettting hanged all 8 leds are > glowing ,if temporarily if i remove the interrupt handler there > is no problem of all 8 leds problem ,coming to bash prompt but not > responding > > transmit_chars is happeneing proper but no receive_chars This can be anything - maybe you just have to disable hardware flow control in your terminal program. I have absolutely no information about your board - do you really assume I could have any glue what your "all 8 LEDs" could mean? I have to disappoint you - the quality of my responses cannot be any better than the information you provide. Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de "Virtual" means never knowing where your next byte is coming from. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
