Hi,
sorry if this is too obvious, but could it be, that you missed to set the
following kernel option:
CONFIG_IP_PNP_DHCP=y
Also setting bootarg to ip=auto will be a good idea. What made me suspicious
from your logs is, that I do not see any output from the kernel sayin'
something about received IP-addresses etc...
Correct me if I'm wrong (I use bootp and tftp here), but at least you should
get something like this even for DHCP:
Sending BOOTP requests .. OK
IP-Config: Got BOOTP answer from 172.40.1.130, my address is 172.40.1.131
IP-Config: Complete:
device=eth0, addr=192.168.1.131, mask=255.255.255.0, gw=255.255.255.255,
host=pappnase, domain=, nis-domain=(none),
bootserver=192.168.1.130, rootserver=192.168.130,
rootpath=/tftpboot/pappnase
Hope this helps,
Gerhard
On Tuesday 18 May 2004 18:32, Brian Hawley wrote:
> > We've been trying to get linux-2.5-ocp up and running on the ebony
> > board. Thanks to those who have helped, but we are still stuck, and have
> > figured out a
> > few things, but need some advice on others.
> >
> > Using the default ebony config (ebony_defconfig) we found that the
> > default bootargs (ip=on) always overrode whatever we passed from the
> > bootargs in u-boot. This always ended up with retries and NFS
> > timeouts...
[SNIPSNAP]
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
