Thanks. I checked out the linux-2.5-ocp using the site you recommended before. Perhaps there have been some patches in the last couple months...
However, I will also download from kernel.org's kernel since the ocp stuff has been merged in. At 05:19 PM 5/19/04 -0700, Eugene Surovegin wrote: >On Wed, May 19, 2004 at 04:42:28PM -0700, Eugene Surovegin wrote: > >[snip] > > > > mal0: Initialized, 4 tx channels, 2 rx channels > > > emac: IBM EMAC Ethernet driver, version 2.0 > > > Maintained by Benjamin Herrenschmidt <benh at kernel.crashing.org> > > > zmii0: input 0 in SMII mode > >This is quite suspicious (SMII) ^^^^ > > > > eth0: IBM emac, MAC 00:04:ac:e3:23:b2 > > > eth0: Found Generic MII PHY (0x08) > > > zmii0: input 1 in RMII mode > >... and this (RMII) ^^^^ > >[snip] > >Please, make sure you are using the latest linux-2.5-ocp or just latest >kernel.org's kernel (OCP stuff was just merged in). > >Eugene ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
