Hello,
I have been told that the first linux 2.6 version, which should work on MPC
82xx is linux-6.8-rc2 ...?
So I have cross-compiled "vanilla" linux-2.6.8-rc2 (using Cygwin with quite
a few patches from Dan Kegel , Martin Schaffner and others to make
cross-compiling work - except for netfilter code, which doesn't
cross-compile on Cygwin and needs to be disabled, which I did) for ppc, 82xx
and created uimage (used mkimage tool from u-boot-1.1.1, which I have built
also on Cygwin with the latest Yuli Barcohen's patch). I have loaded this
uimage onto PQ2 ADS witn MPC8270 (U-Boot version loaded on the PQ2 ADS flash
is still 1.0.0.) and tried to run it with "bootm" - but it fails (resets)
immediately after decompressing the image ... and I do not have 82xx
back-end Jtag probe/debugger available to me to see what is happening...
U-Boot 1.0.0 (Jan 30 2004 - 16:09:23)
=> tftpboot 200000 uimagenfs
TFTP from server 172.16.240.200; our IP address is 172.16.119.3
Filename 'uimagenfs'.
Load address: 0x200000
Loading: T #################################################################
#################################################################
#################################################################
#################################################################
#############################################################
done
Bytes transferred = 1641554 (190c52 hex)
=>bootm
Has anybody successfuly run linux-2.6.8-rc2 (or previous linux 2.6 version)
on MPC 82xx ?
If so, could you share with me ".config" file used ?
On another more general subject - does Freescale (former Motorola) has a
single focal point person who's charter is to promote Linux board support on
Motorola development boards (aka Linux czar) - do you have his contact info
?
I know that there were Linux OS Development Breakout Sessions SNDF (Smart
Networks Developer Forum ) April, 2004 Dallas
http://www.freescale.com/webapp/sps/site/overview.jsp?nodeId=02VS0llCc5pzMP5
51361587974
So somebody should stand behind Linux development activity at Freescale/
Motorola (both IBM and HP do have dedicated Linux Labs and people working
strictly on Linux ...) I guess ...
Thanks,
Best Regards,
Alex
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
