On Aug 12, 2004, at 10:29 AM, Oliver Fuchs wrote:
> as far as I understand, my kernel (2.4.24 from ELDK3.0) is not
> prepared for Ethernet on SCC3 of the MPC82xx.
It depends completely on how you chose the multiplex
the IO pins. There are quite a few combinations, the
well known ones (for currently supported configurations)
are already part of the file.
> It seems to be necessary to modify arch/ppc/8260_io/enet.c
> Am I right?
> Is there anyone who has done this already?
An #ifdef and two lines of #defines should be all you need,
unless you have some special BSCR or other set up needed.
-- Dan
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
