Hi all, > Andrey: Gabor has a working fec.c implementation.
> Apparently, you've both worked out a version of bestcomm for 2.6. But > you both based it on old code. (even non GPL). Terrible, may be its time to create special project for MPC5200 (if it doesn't exist in somewhere in I-net)? First intention - sourceforge. Comments/suggestions? Sylvain, Wolfgang I know you already have projects. But in case of Sylvain, as I understand, his project on his homepage. In case of Wolfgang, I'm not sure that DENX will happy to share their internal CVS with all I-net for write access. Am I right? > I've just tried just taking the newer one and stick it in 2.6 with the > fec Gabor sent, but it just crashes so it need more work ;) Dale > Farnsworth just said it'll look into it and porting new bestcomm as well. My fec port work ok. > To resume the "close" future I'm planning : > I'm busy for two weeks ( I was planning on finishing other stuff earlier > and didn't work out finally ;( ). So I work less on the MPC but after > that, that's a full time assignment. > - USB: Dale's patch are on their way to the official kernel. Once they > are in, He or I will send the necessary MPC5200 dependent stuff. > - PCI: I'm working on that now, just brushing it up then I'll put it on > my tree and require testing > - I2C: Waiting Adrian Cox patches to be in official tree ( they are in > -mm ), then apply mpc5200 specifics. > - BestComm : Dale (the original fec writing among other things) is > adapting the newer bestcommcode and cleaning the fec driver as well. > - IDE: Once I get PCI in my tree, I'll look at IDE, a DMA-less version > at first. And CAN, RTC, and possible CRC32/16 (if it will fast enough) :). -- Best regards, Andrey Volkov ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/