I've been trying to get an Intel eepro100 card working on a Walnut board. I've tried both the 1.09 and 1.19 versions of the driver (eepro100.c). Initially, both failed the self- test step. I was able to get past that one by invalidating the dcache after issuing the self-test directive. However, I now find that the card is neither transmitting nor receiving reliably. I get messages like:
eth1: Unknown receiver error, status=0x5048. [lots of these] and eth1: Transmit timed out: status 0050 0000 at 2/8 commands 00a00300 00a003000. eth1: Restarting the chip... eth1: Command unit failed to mark command 00030000 as complete at 6. Any suggestions (other than junking this card, which is not an option for me) most welcome. -- David Wright, InfiniSwitch Corp. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
