Hi Magnus, Yes. That's what I am using(pcmcia-cs 3.1.10 + gz00000.gz//is the patch file from webpage).
sorry for my mis-typing. Jacky -----Original Message----- From: Magnus Damm [mailto:[EMAIL PROTECTED] Sent: Thursday, April 18, 2002 5:44 PM To: Jacky Wang Cc: Conn Clark; May Ling List Subject: Re: Does anyone port m8xx_pcmcia driver to Linux Kernel successfully? Hi folks, The patch file you are referring to, is that the same patch as I released in the mail below? http://lists.linuxppc.org/linuxppc-embedded/200002/msg00093.html If that is the case I think you should try pcmcia-cs-3.1.10 instead of 2.1.10. Or was that a typo? / Magnus Jacky Wang wrote: > > Conn, > > I found while use Linux 2.2.13 + pcmcia-cs 2.1.10 + patch file (w/o any > modification), I couldn't re-compile pcmcia-cs successfully. > They are what I work with: > Debian OS w/ 2.2.18pre21 kernel > powerpc-linux-gcc 2.95.2 > powerpc-linux-as 2.9.5 > > Would you give me your advise? Or.. it's a problem about configurations of > Makefile? > > Jacky > -----Original Message----- > From: Jacky Wang [mailto:jacky at premierme.com.tw] > Sent: Thursday, April 18, 2002 9:31 AM > To: Conn Clark > Cc: May Ling List > Subject: RE: Does anyone port m8xx_pcmcia driver to Linux Kernel successfully? > > Conn, > > while I enter the ftp site of MontaVista, I couldn't see anything on the site. > If it is the patch file that Magnus loaded in the webpage? > > Jacky > > -----Original Message----- > From: root at esteem.com [mailto:root at esteem.com]On Behalf Of Conn Clark > Sent: Thursday, April 18, 2002 1:12 AM > To: Jacky Wang > Cc: May Ling List > Subject: Re: Does anyone port m8xx_pcmcia driver to Linux Kernel successfully? > > Jacky Wang wrote: > > > > Conn, > > > > hmm...... > > sounds good. > > > > but, I am a newbie about programming with linux kernel and MPC850. > > Could you tell me which kernel release and how to port it smoothly? > > We are using kernel 2.2.13 and pcmcia card services 3.1.10 . > Unfortunately our hardware is proprietary and doesn't have a full pcmcia > interface. I had to comment out all the voltage detect and such. Other > than that I just followed the instructions that came with the mpc8xx > patch file. The patch used to be availible from montavista's ftp site > but > isn't any more. > > here is some help full notes. > > http://lists.linuxppc.org/linuxppc-embedded/200005/msg00227.html > > Conn > > -- > > ***************************************************************** > If you live at home long enough, your parents will move out. > ***************************************************************** > > Conn Clark > Engineering Stooge clark at esteem.com > Electronic Systems Technology Inc. www.esteem.com > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
