On Tue, 1 May 2001, N.Suresh wrote: > Hi, > > I am trying to compile and MPC8xx-2.2.13 on MBX board (MBX860-005B). > > I am able to compile and generate zImage which i am downloading thru > > <cut> > > EPPC-Bug>pl 20 0 > > loaded at: 00210000 0021B1D8 > relocated to: 00100000 0010B1D8 > board data at: 003F4558 003F4580 > relocated to: 00200100 00200128 > zimage at: 00216000 00271893 > initrd at: 00271893 00273E7D > avail ram: 00274000 00400000 > > Linux/PPC load: > Uncompressing Linux...done. > Now booting the kernel
[ Its been a while... ] That looks good so far. The next thing you want to see is the Linux banner "Linux version ...". I would not change KERNELLOAD. Are you using any additional ram? I had an additional DIMM on my board, and I had to hack arch/ppc/mbxboot/head.S to set up BR2/OR2 because EPPC-Bug didn't recognize my DIMM. You should be using the Monta Vista tools. You might want to compare your .config to mine, http://www.bluebutton.com/proj/mbxlinux/dot.config Make sure you have your bootp and NFS (for root fs) servers ready when the board finally boots. -Jamie > > </cut> > > and the system hangs.. i tried to change the KERNELLOAD and then also > > it is not working. > > Any idea what's happening? > > ( I have seen the mail archive and Jamie Guinen has told it is working > > with EPPC-Bug). > > thanx in advance, > > bye > > -----------------***************************************---------------- > N.SURESH > Research Engineer, > Centre For Development of Telematics, > 71/1,Sneha Complex, > Bangalore-560052 > -----------------***************************************---------------- ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
