Hello Sven, On 07/03/2005, you wrote:
> But i hear Nicolas has done some useful work yesterday evening, i will > review it as soon as he is back from dreamland :) You can find the patch against 2.6.11 from kernel.org here: http://powernico.free.fr/patch_2.6.11_mv64x60.diff.bz2 This patch shouldn't break mv code for others platform (non PegasosII), and fix Pegasos II init... Basicly, I added mv64360_ispegasos2() in include/asm-ppc/mv64x60.h. Then: in arch/ppc/syslibs/mv64360_pic.c, I skip the IRQ init code in arch/ppc/syslibs/mv64x60.c, I skip all the chip init & patch the ressources tables for Pegasos II hardware (register base & IRQ). in include/asm-ppc/mv64x60.h: added mv64360_ispegasos2() in arch/ppc/kernel/chrp_setup.c, rename/added pegasos2_stuff() and call mv64x60_init() if CONFIG_MV64x60 in drivers/net/mv64xx_eth.c, use SA_SHIRQ instead of SA_INTERRUPT for request_irq if pegasos II detected The only thing to do is to add mv64360_ispegasos2() in include/asm-mips/... because I use this function to use the correct flags in the ethernet driver. Of course, this patch may be discuss as there are several architecture using Marvell chipsets and each requieres some specific code. I don't know where it's the best to place mv64360_ispeasos2(), maybe this func could even be renamed mv64x60_ispegasos2().. Please, people from others MV64x60 architectures review this patch, modify if it neeeded and check it doesn't break your architecture (I shouldn't but for MIPS ethernet). Regards -- Nicolas DET MorphOS & Linux developer
