is there something printed before 'Now booting the kernel'? If so, do the memory ranges not overlap or something?
Jaap-Jan On 17-mrt-05, at 13:49, S. van Beek wrote: > Hello there, > ? > This is our first post on this list, hi all! > We're two Dutch students working with a Virtex-II pro ff672 board from > Memec with the Communications 2 module. We've compiled a simple kernel > wich comes with MontaVista Linux?3.1 (2.4.20) with ethernet and a > serial port. It mounts its root filesystem over NFS and everything > seems to work nicely. The next step we wanted to make was > adding?support for the Flash?on the com board. We added the IP to the > hardware and loaded the new bitstream in the FPGA. Next thing, we > enabled support for MTD devices in the kernel. After that, the kernel > did not seem to boot anymore. It stopped at the message 'Now booting > the kernel'. So we read some documentation about debugging. We > recompiled this kernel with the -g -ggdb options and removed the -O > (optimalization) flag. Then we did not even see the ppc boot loader > messages anymore when trying to boot. So we tried to compile the first > kernel (with only serial and ethernet support) -wich worked fine > before-?with debugging and it gave us the same result.. no output at > all. > Can anyone give us some hints on what we can try more to find out > what is going wrong? > ? > Regards, > Sander van Beek > Daniel van Os > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded at ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded J.G.J. Boor Anton Philipsweg 1 Software Engineer 1223 KZ Hilversum AimSys bv tel. +31 35 689 1941 Postbus 2194, 1200 CD Hilversum mailto:jjboor at aimsys.nl
