Hi Tom,
Thanks for your reply, but then I only get:
Now booting the kernel
Beste regards,
Jaap
-----Oorspronkelijk bericht-----
Van: T Ziomek [mailto:ctz001 at email.mot.com]
Verzonden: donderdag 1 december 2005 02:06
Aan: Jaap de Jong; linuxppc-embedded
Onderwerp: Re: Xilinx_uartlite
> I'm trying to get my avnet virtex4fx12 running with linux.
> It boots, but ends with:
> Warning: unable to open an initial console.
> This means /dev/console was not opened; init is running.
> Since my board has no 16550 uart I must use xilinx_uartlite Part of my
> configuration:
> +--Character devices
> +--Xilinx UART Lite ON
> +--Console on UART Lite port ON
> Any ideas?
/dev/console may not be tied to your UARTLite. If you don't specify the
console on your kernel command line, try adding something along the
lines of "console=ttyS0,19200" to it (with the appropriate device and
baud rate of course).
Tom
--
/"\ ASCII Ribbon Campaign |
\ / | Email to user 'CTZ001'
X Against HTML | at 'email.mot.com'
/ \ in e-mail & news |
