In message <OF0098DF7F.857DE409-ON652570CA.001AA3F7-652570CA.0036DB32 at tcs.com> you wrote: > > I have RAM version of U-Boot which is running on a board similar to > MPC8260. My memory map isas follows:
Your mode of operation is unsupported. You either ignored to read the FAQ, or it's content: http://www.denx.de/wiki/view/DULG/CanUBootBeConfiguredSuchThatItCanBeStartedInRAM > Staring address Device Size Memory > controller and CS ... 0F00 0000 CPU internal registers 3000 0000 SDRAM ... Your memory map is bogus. You either ignored to read the FAQ, or it's content: http://www.denx.de/wiki/view/PPCEmbedded/Kernel#Section_10.2. ... > Verifying Checksum ... OK > Uncompressing Kernel Image ... > > The system hangs here and is not able to uncompress the kernel any > further. I have checked in the FAQs provided in the denx's site, but could > not find anything similar to my case. You either ignored to read the FAQ, or it's content: http://www.denx.de/wiki/view/DULG/LinuxUncompressingError I think you should go back and read the existing documentation, and follow the advice it contains. If you continue to ignore what's written in the FAQ's you would probably also ignore any answeres to your postings here. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de This is an unauthorized cybernetic announcement.
