Has anybody out there gotten this combination of hardware and software to work?
I am trying to figure out if this is a problem with my particular system/configuration or inherent in the current software baseline. The problem is that while all software loads and runs without error, I am unable to detect any devices/nodes on the IEEE1394 bus. Thanks, Jeff Angielski The PTR Group Some details for those not faint of heart... Custom MPC826x board EKF CYMBAL cPCI adapter LACIE 250GB external HD u-boot 1.1.3 Denx 3.1 - 2.4.25+ Latest ieee1394 Linux 2.4 SVN snapshot from http://www.linux1394.org/ Command sequence: insmod ieee1394.o insmod ohci1394.o insmod raw1394.o insmod sbp2.o testlibraw rescan-scsi-bus.sh Output in /var/log/messages ohci1394: $Rev: 1286 $ Ben Collins <bcollins at debian.org> ohci1394_0: Remapped memory spaces reg 0xc90a6800 ohci1394_0: Soft reset finished ohci1394_0: Iso contexts reg: 000000a8 implemented: 0000000f ohci1394_0: 4 iso receive contexts available ohci1394_0: Iso contexts reg: 00000098 implemented: 000000ff ohci1394_0: 8 iso transmit contexts available ohci1394_0: GUID: 00c08802:00a41ca0 ohci1394_0: Receive DMA ctx=0 initialized ohci1394_0: Receive DMA ctx=0 initialized ohci1394_0: Transmit DMA ctx=0 initialized ohci1394_0: Transmit DMA ctx=1 initialized ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[66] MMIO=[bffff800-bfffffff] Max Packet=[2048] ohci1394_0: request csr_rom address: c5d78000 ieee1394: CSR: setting expire to 10, HZ=100 ohci1394_0: IntEvent: 00020000 ohci1394_0: irq_handler: Bus reset requested ohci1394_0: Cancel request received raw1394: /dev/raw1394 device initialized ieee1394: sbp2: sbp2_module_init sbp2: $Rev: 1227 $ Ben Collins <bcollins at debian.org> ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1) raw1394:write_request called raw1394:write_request called scsi singledevice 0 0 0 0 scsi singledevice 0 0 0 1 scsi singledevice 0 0 0 2 scsi singledevice 0 0 0 3 scsi singledevice 0 0 0 4 scsi singledevice 0 0 0 5 scsi singledevice 0 0 0 6 scsi singledevice 0 0 0 7 Output from testlibraw: successfully got handle current generation number: 1 1 card(s) found nodes on bus: 0, card name: ohci1394 using first card found: 0 nodes on bus, local ID is 0, IRM is 63 doing transactions with custom tag handler using standard tag handler and synchronous calls testing FCP monitoring on local node testing config rom stuff get_config_rom returned 0, romsize 64, rom_version 1 here are the first 10 quadlets: 0. quadlet: 0x04047381 1. quadlet: 0x31333934 2. quadlet: 0xe000a002 3. quadlet: 0x00c08802 4. quadlet: 0x00a41ca0 5. quadlet: 0x000323fb 6. quadlet: 0x03000000 7. quadlet: 0x81000002 8. quadlet: 0x0c0083c0 9. quadlet: 0x000603ab update_config_rom returned 0 polling for leftover messages
