Hi Eugene, I'm seeing some "NETDEV WATCHDOG: eth0: transmit timed out" messages on the Ocotea when it's connected to a 10baseT hub, and it's put under heavy load. I'm using the most current 2.6 git tree.
This can be reproduced by ssh'ing into the Ocotea and running the command "ping <host-machine> -A -s 1200", then also doing the same ping command from the host to the Ocotea. The pings will be successful for a short time, then all transmits on the Ocotea will stop for a few seconds (usually preceded by a few duplicate packets). Transmits begin again once the timeout occurs. /proc/net/dev doesn't report any errors, just a few dropped packets. Do you know what might be causing the EMAC to stop transmitting in this situation? Thanks, Wade Farnsworth
