Make sure your system.mss contains something like: BEGIN OS PARAMETER OS_NAME = linux_mvl31 PARAMETER OS_VER = 1.01.a PARAMETER PROC_INSTANCE = ppc405_0 PARAMETER MEM_SIZE = 0x4000000 PARAMETER PLB_CLOCK_FREQ_HZ = 100000000 PARAMETER connected_periphs = (RS232_Uart,IIC_EEPROM,SysACE_CompactFlash,Ethernet_MAC,opb_intc_0) END
If it does not use XPS and in the menu select Platform Software Settings. Use linux as Operating System and linux_mvl31_v1_01_a as the MLD. The rerun the library generation. Also make sure that you have enabled the interrupts for System ACE CF in the hardware. - Peter Paulinha wrote: > Hi all, > > I have been trying to run linux 2.4.26 on Virtex 4 for a while and > without success. > > I am trying to implement a simple design, with an UART, SystemACE and > everything interrupt driven. When I try to make bzImage, there is an > error in (SysACE) adapter.c file, because XPAR_INTC_0_SYSACE_0_VEC_ID > is not defined. > > I have applied the patch given by Xilinx for switching from the ml300 > to the ml403, which copies the bsp, .config and xparameter files into > the kernel. > > I am stucked here, and do not know how to keep going from that. > Could anyone help me a little bit? > > Thanks and have a good day! > >------------------------------------------------------------------------ > >_______________________________________________ >Linuxppc-embedded mailing list >Linuxppc-embedded at ozlabs.org >https://ozlabs.org/mailman/listinfo/linuxppc-embedded >
