--- "David H. Lynch Jr." <dhlii at comcast.net> wrote:
> > I am just polishing off bringup a Xilinx Virtex > IV/ppc405 system with > minimal hardware under 2.6.14.4. > I have a collection of patches that I can submit > for the specific, > board, for the Virtex IV, for board specific > hardware, ... > Additionally I have 2 complete boot loader through > full serial driver > implementations of a pseudo serial console driver > for this board when it > is in a HOST development system - it is a compact > flash card normally > plugged into a PC during development and using the > PC as the console, > and a complete serial driver chain for the Xilinx > UartLite as a console > when not in a Host, or as a general serial driver. > The Xilinx Driver is > based heavily on other 2.6 driver/serial drivers and > not the 2.4 > implementation from Xilinx. > > Is this list the right place to submit this ? > Is there a HOWTO addressing the rules/procedures to > do so. Look in the Documentation directory, specificly the two files SubmittingDrivers and SubmittingPatches where the correct procedure is explained. > > I have not looked at the kernel style guides, but > the style of this > code is pretty much identical to other Kernel code. > The UartLite driver > is virtually indistinguishable from other > driver/serial drivers except > the few places where hardware differences require > changes, and that > there is a full tree of end-end support similar to > what exists for the > 8250's. > > David H. Lynch Jr. > DLA Systems > 354 Rudy Dam Rd. > Lititz, PA 17543 > 717.627.3770 > > > > > > > > > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded at ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > John Carlson <carlsj at yahoo.com> __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
