The PPC405 hard core is used in both the Virtex-II Pro and Virtex 4 FX
FPGAs. This patch cleans up the Virtex naming convention to reflect more
than just the Virtex-II Pro.
Rename files virtex-ii_pro.[ch] to virtex.[ch]
Rename config value VIRTEX_II_PRO to XILINX_VIRTEX
Signed-off-by: Grant C. Likely <grant.likely at secretlab.ca>
---
arch/ppc/platforms/4xx/Kconfig | 2 -
arch/ppc/platforms/4xx/Makefile | 2 -
arch/ppc/platforms/4xx/virtex-ii_pro.c | 60 -------------------
arch/ppc/platforms/4xx/virtex-ii_pro.h | 99 --------------------------------
arch/ppc/platforms/4xx/virtex.c | 60 +++++++++++++++++++
arch/ppc/platforms/4xx/virtex.h | 99 ++++++++++++++++++++++++++++++++
arch/ppc/platforms/4xx/xilinx_ml300.c | 2 -
arch/ppc/platforms/4xx/xilinx_ml300.h | 2 -
arch/ppc/syslib/Makefile | 2 -
9 files changed, 164 insertions(+), 164 deletions(-)
delete mode 100644 arch/ppc/platforms/4xx/virtex-ii_pro.c
delete mode 100644 arch/ppc/platforms/4xx/virtex-ii_pro.h
create mode 100644 arch/ppc/platforms/4xx/virtex.c
create mode 100644 arch/ppc/platforms/4xx/virtex.h
515b355e603129ac51da756f397365703a1742fd
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
index 76f4476..7711d2a 100644
--- a/arch/ppc/platforms/4xx/Kconfig
+++ b/arch/ppc/platforms/4xx/Kconfig
@@ -197,7 +197,7 @@ config 405GPR
depends on SYCAMORE
default y
-config VIRTEX_II_PRO
+config XILINX_VIRTEX
bool
depends on XILINX_ML300
default y
diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile
index 1dd6d7f..4db749d 100644
--- a/arch/ppc/platforms/4xx/Makefile
+++ b/arch/ppc/platforms/4xx/Makefile
@@ -24,4 +24,4 @@ obj-$(CONFIG_440GX) += ibm440gx.o
obj-$(CONFIG_440SP) += ibm440sp.o
obj-$(CONFIG_405EP) += ibm405ep.o
obj-$(CONFIG_405GPR) += ibm405gpr.o
-obj-$(CONFIG_VIRTEX_II_PRO) += virtex-ii_pro.o
+obj-$(CONFIG_XILINX_VIRTEX) += virtex.o
diff --git a/arch/ppc/platforms/4xx/virtex-ii_pro.c
b/arch/ppc/platforms/4xx/virtex-ii_pro.c
deleted file mode 100644
index 097cc9d..0000000
--- a/arch/ppc/platforms/4xx/virtex-ii_pro.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * arch/ppc/platforms/4xx/virtex-ii_pro.c
- *
- * Author: MontaVista Software, Inc.
- * source at mvista.com
- *
- * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-#include <linux/config.h>
-#include <linux/init.h>
-#include <asm/ocp.h>
-#include "virtex-ii_pro.h"
-
-/* Have OCP take care of the serial ports. */
-struct ocp_def core_ocp[] = {
-#ifdef XPAR_UARTNS550_0_BASEADDR
- { .vendor = OCP_VENDOR_XILINX,
- .function = OCP_FUNC_16550,
- .index = 0,
- .paddr = XPAR_UARTNS550_0_BASEADDR,
- .irq = XPAR_INTC_0_UARTNS550_0_VEC_ID,
- .pm = OCP_CPM_NA
- },
-#ifdef XPAR_UARTNS550_1_BASEADDR
- { .vendor = OCP_VENDOR_XILINX,
- .function = OCP_FUNC_16550,
- .index = 1,
- .paddr = XPAR_UARTNS550_1_BASEADDR,
- .irq = XPAR_INTC_0_UARTNS550_1_VEC_ID,
- .pm = OCP_CPM_NA
- },
-#ifdef XPAR_UARTNS550_2_BASEADDR
- { .vendor = OCP_VENDOR_XILINX,
- .function = OCP_FUNC_16550,
- .index = 2,
- .paddr = XPAR_UARTNS550_2_BASEADDR,
- .irq = XPAR_INTC_0_UARTNS550_2_VEC_ID,
- .pm = OCP_CPM_NA
- },
-#ifdef XPAR_UARTNS550_3_BASEADDR
- { .vendor = OCP_VENDOR_XILINX,
- .function = OCP_FUNC_16550,
- .index = 3,
- .paddr = XPAR_UARTNS550_3_BASEADDR,
- .irq = XPAR_INTC_0_UARTNS550_3_VEC_ID,
- .pm = OCP_CPM_NA
- },
-#ifdef XPAR_UARTNS550_4_BASEADDR
-#error Edit this file to add more devices.
-#endif /* 4 */
-#endif /* 3 */
-#endif /* 2 */
-#endif /* 1 */
-#endif /* 0 */
- { .vendor = OCP_VENDOR_INVALID
- }
-};
diff --git a/arch/ppc/platforms/4xx/virtex-ii_pro.h
b/arch/ppc/platforms/4xx/virtex-ii_pro.h
deleted file mode 100644
index 026130c..0000000
--- a/arch/ppc/platforms/4xx/virtex-ii_pro.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * arch/ppc/platforms/4xx/virtex-ii_pro.h
- *
- * Include file that defines the Xilinx Virtex-II Pro processor
- *
- * Author: MontaVista Software, Inc.
- * source at mvista.com
- *
- * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_VIRTEXIIPRO_H__
-#define __ASM_VIRTEXIIPRO_H__
-
-#include <linux/config.h>
-#include <platforms/4xx/xparameters/xparameters.h>
-
-/* serial defines */
-
-#define RS_TABLE_SIZE 4 /* change this and add more devices below
- if you have more then 4 16x50 UARTs */
-
-#define BASE_BAUD (XPAR_UARTNS550_0_CLOCK_FREQ_HZ/16)
-
-/* The serial ports in the Virtex-II Pro have each I/O byte in the
- * LSByte of a word. This means that iomem_reg_shift needs to be 2 to
- * change the byte offsets into word offsets. In addition the base
- * addresses need to have 3 added to them to get to the LSByte.
- */
-#define STD_UART_OP(num) \
- { 0, BASE_BAUD, 0, XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \
- ASYNC_BOOT_AUTOCONF, \
- .iomem_base = (u8 *)XPAR_UARTNS550_##num##_BASEADDR + 3, \
- .iomem_reg_shift = 2, \
- .io_type = SERIAL_IO_MEM},
-
-#if defined(XPAR_INTC_0_UARTNS550_0_VEC_ID)
-#define ML300_UART0 STD_UART_OP(0)
-#else
-#define ML300_UART0
-#endif
-
-#if defined(XPAR_INTC_0_UARTNS550_1_VEC_ID)
-#define ML300_UART1 STD_UART_OP(1)
-#else
-#define ML300_UART1
-#endif
-
-#if defined(XPAR_INTC_0_UARTNS550_2_VEC_ID)
-#define ML300_UART2 STD_UART_OP(2)
-#else
-#define ML300_UART2
-#endif
-
-#if defined(XPAR_INTC_0_UARTNS550_3_VEC_ID)
-#define ML300_UART3 STD_UART_OP(3)
-#else
-#define ML300_UART3
-#endif
-
-#if defined(XPAR_INTC_0_UARTNS550_4_VEC_ID)
-#error Edit this file to add more devices.
-#elif defined(XPAR_INTC_0_UARTNS550_3_VEC_ID)
-#define NR_SER_PORTS 4
-#elif defined(XPAR_INTC_0_UARTNS550_2_VEC_ID)
-#define NR_SER_PORTS 3
-#elif defined(XPAR_INTC_0_UARTNS550_1_VEC_ID)
-#define NR_SER_PORTS 2
-#elif defined(XPAR_INTC_0_UARTNS550_0_VEC_ID)
-#define NR_SER_PORTS 1
-#else
-#define NR_SER_PORTS 0
-#endif
-
-#if defined(CONFIG_UART0_TTYS0)
-#define SERIAL_PORT_DFNS \
- ML300_UART0 \
- ML300_UART1 \
- ML300_UART2 \
- ML300_UART3
-#endif
-
-#if defined(CONFIG_UART0_TTYS1)
-#define SERIAL_PORT_DFNS \
- ML300_UART1 \
- ML300_UART0 \
- ML300_UART2 \
- ML300_UART3
-#endif
-
-#define DCRN_CPMFR_BASE 0
-
-#include <asm/ibm405.h>
-
-#endif /* __ASM_VIRTEXIIPRO_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/virtex.c b/arch/ppc/platforms/4xx/virtex.c
new file mode 100644
index 0000000..1de7a27
--- /dev/null
+++ b/arch/ppc/platforms/4xx/virtex.c
@@ -0,0 +1,60 @@
+/*
+ * arch/ppc/platforms/4xx/virtex.c
+ *
+ * Author: MontaVista Software, Inc.
+ * source at mvista.com
+ *
+ * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is licensed
+ * "as is" without any warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/ocp.h>
+#include <platform/4xx/virtex.h>
+
+/* Have OCP take care of the serial ports. */
+struct ocp_def core_ocp[] = {
+#ifdef XPAR_UARTNS550_0_BASEADDR
+ { .vendor = OCP_VENDOR_XILINX,
+ .function = OCP_FUNC_16550,
+ .index = 0,
+ .paddr = XPAR_UARTNS550_0_BASEADDR,
+ .irq = XPAR_INTC_0_UARTNS550_0_VEC_ID,
+ .pm = OCP_CPM_NA
+ },
+#ifdef XPAR_UARTNS550_1_BASEADDR
+ { .vendor = OCP_VENDOR_XILINX,
+ .function = OCP_FUNC_16550,
+ .index = 1,
+ .paddr = XPAR_UARTNS550_1_BASEADDR,
+ .irq = XPAR_INTC_0_UARTNS550_1_VEC_ID,
+ .pm = OCP_CPM_NA
+ },
+#ifdef XPAR_UARTNS550_2_BASEADDR
+ { .vendor = OCP_VENDOR_XILINX,
+ .function = OCP_FUNC_16550,
+ .index = 2,
+ .paddr = XPAR_UARTNS550_2_BASEADDR,
+ .irq = XPAR_INTC_0_UARTNS550_2_VEC_ID,
+ .pm = OCP_CPM_NA
+ },
+#ifdef XPAR_UARTNS550_3_BASEADDR
+ { .vendor = OCP_VENDOR_XILINX,
+ .function = OCP_FUNC_16550,
+ .index = 3,
+ .paddr = XPAR_UARTNS550_3_BASEADDR,
+ .irq = XPAR_INTC_0_UARTNS550_3_VEC_ID,
+ .pm = OCP_CPM_NA
+ },
+#ifdef XPAR_UARTNS550_4_BASEADDR
+#error Edit this file to add more devices.
+#endif /* 4 */
+#endif /* 3 */
+#endif /* 2 */
+#endif /* 1 */
+#endif /* 0 */
+ { .vendor = OCP_VENDOR_INVALID
+ }
+};
diff --git a/arch/ppc/platforms/4xx/virtex.h b/arch/ppc/platforms/4xx/virtex.h
new file mode 100644
index 0000000..049c767
--- /dev/null
+++ b/arch/ppc/platforms/4xx/virtex.h
@@ -0,0 +1,99 @@
+/*
+ * arch/ppc/platforms/4xx/virtex.h
+ *
+ * Include file that defines the Xilinx Virtex-II Pro processor
+ *
+ * Author: MontaVista Software, Inc.
+ * source at mvista.com
+ *
+ * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is licensed
+ * "as is" without any warranty of any kind, whether express or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_VIRTEX_H__
+#define __ASM_VIRTEX_H__
+
+#include <linux/config.h>
+#include <platforms/4xx/xparameters/xparameters.h>
+
+/* serial defines */
+
+#define RS_TABLE_SIZE 4 /* change this and add more devices below
+ if you have more then 4 16x50 UARTs */
+
+#define BASE_BAUD (XPAR_UARTNS550_0_CLOCK_FREQ_HZ/16)
+
+/* The serial ports in the Virtex-II Pro have each I/O byte in the
+ * LSByte of a word. This means that iomem_reg_shift needs to be 2 to
+ * change the byte offsets into word offsets. In addition the base
+ * addresses need to have 3 added to them to get to the LSByte.
+ */
+#define STD_UART_OP(num) \
+ { 0, BASE_BAUD, 0, XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \
+ ASYNC_BOOT_AUTOCONF, \
+ .iomem_base = (u8 *)XPAR_UARTNS550_##num##_BASEADDR + 3, \
+ .iomem_reg_shift = 2, \
+ .io_type = SERIAL_IO_MEM},
+
+#if defined(XPAR_INTC_0_UARTNS550_0_VEC_ID)
+#define ML300_UART0 STD_UART_OP(0)
+#else
+#define ML300_UART0
+#endif
+
+#if defined(XPAR_INTC_0_UARTNS550_1_VEC_ID)
+#define ML300_UART1 STD_UART_OP(1)
+#else
+#define ML300_UART1
+#endif
+
+#if defined(XPAR_INTC_0_UARTNS550_2_VEC_ID)
+#define ML300_UART2 STD_UART_OP(2)
+#else
+#define ML300_UART2
+#endif
+
+#if defined(XPAR_INTC_0_UARTNS550_3_VEC_ID)
+#define ML300_UART3 STD_UART_OP(3)
+#else
+#define ML300_UART3
+#endif
+
+#if defined(XPAR_INTC_0_UARTNS550_4_VEC_ID)
+#error Edit this file to add more devices.
+#elif defined(XPAR_INTC_0_UARTNS550_3_VEC_ID)
+#define NR_SER_PORTS 4
+#elif defined(XPAR_INTC_0_UARTNS550_2_VEC_ID)
+#define NR_SER_PORTS 3
+#elif defined(XPAR_INTC_0_UARTNS550_1_VEC_ID)
+#define NR_SER_PORTS 2
+#elif defined(XPAR_INTC_0_UARTNS550_0_VEC_ID)
+#define NR_SER_PORTS 1
+#else
+#define NR_SER_PORTS 0
+#endif
+
+#if defined(CONFIG_UART0_TTYS0)
+#define SERIAL_PORT_DFNS \
+ ML300_UART0 \
+ ML300_UART1 \
+ ML300_UART2 \
+ ML300_UART3
+#endif
+
+#if defined(CONFIG_UART0_TTYS1)
+#define SERIAL_PORT_DFNS \
+ ML300_UART1 \
+ ML300_UART0 \
+ ML300_UART2 \
+ ML300_UART3
+#endif
+
+#define DCRN_CPMFR_BASE 0
+
+#include <asm/ibm405.h>
+
+#endif /* __ASM_VIRTEX_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.c
b/arch/ppc/platforms/4xx/xilinx_ml300.c
index 0b1b77d..b0de0a2 100644
--- a/arch/ppc/platforms/4xx/xilinx_ml300.c
+++ b/arch/ppc/platforms/4xx/xilinx_ml300.c
@@ -22,7 +22,7 @@
#include <asm/machdep.h>
#include <asm/ocp.h>
-#include <platforms/4xx/virtex-ii_pro.h> /* for NR_SER_PORTS */
+#include <platforms/4xx/virtex.h> /* for NR_SER_PORTS */
/*
* As an overview of how the following functions (platform_init,
diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.h
b/arch/ppc/platforms/4xx/xilinx_ml300.h
index f8c5884..8993981 100644
--- a/arch/ppc/platforms/4xx/xilinx_ml300.h
+++ b/arch/ppc/platforms/4xx/xilinx_ml300.h
@@ -16,7 +16,7 @@
#define __ASM_XILINX_ML300_H__
/* ML300 has a Xilinx Virtex-II Pro processor */
-#include <platforms/4xx/virtex-ii_pro.h>
+#include <platforms/4xx/virtex.h>
#ifndef __ASSEMBLY__
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index b8d08f3..5ceb27b 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -16,7 +16,7 @@ obj-$(CONFIG_440GP) += ibm440gp_common.
obj-$(CONFIG_440GX) += ibm440gx_common.o
obj-$(CONFIG_440SP) += ibm440gx_common.o ibm440sp_common.o
ifeq ($(CONFIG_4xx),y)
-ifeq ($(CONFIG_VIRTEX_II_PRO),y)
+ifeq ($(CONFIG_XILINX_VIRTEX),y)
obj-$(CONFIG_40x) += xilinx_pic.o
else
ifeq ($(CONFIG_403),y)
--
1.0.6-g58e3
