Narendra wrote: > > But as i found through debug message, socket is configured for > 5volts and the CIS read from my card wants 3.3V. So my Config() > routine is failing since there is a mismatch in configured Vcc and > Requested Vcc. and Kernel is crashing. >
You are using a 3.3V card in an 5V socket. If the card can do this - and I think Prism 2 can - you can bypass the code which checks if the Vcc is correct. You will maybe find it if you look in the WLAN drivers source code and search for conf.Vcc. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
