Is anyone seriously trying to do embedded Linux development for power PC using Cygwin as the host?
I'm trying to get linux running on proprietary MPC850/860/8260 boards. I'll start with either the 850 or the 860 board as I'm more familiar with these processors than with the 8260. I have the Macraigor blackbird BDM interface for the MPC850/860. I have both an Agilent ethernet based probe and the Wind River Vision Probe II for the 8260. All boards will be running with plenty of flash and RAM: 16MB and 32MB respectively for both the 850 and 860 boards. They will be running with no disk drive, no monitor and a serial port on SCC3. I may have real time requirements, but this is yet to be determined. This is a learning exercise at this stage. John Fisher NEC Australia Pty Ltd ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/