In message <8039970AF146314597457D3B51A68B382E042D at cossmgmbx02.email.corp.tld> you wrote: > > Wolfgang is sleeping right now so I'll try to recreate his standard > response...
Ooops?? Seems some parts of my body are actually quite active while I'm asleeep :-) I would have replied to this message, too, but it did not arrive here yet. But thanks for the nice summary. > From: li [mailto:slowforce at 21cn.com] > Sent: Friday, November 07, 2003 11:49 AM > To: linuxppc-embedded at lists.linuxppc.org > Cc: linuxppc-embedded at lists.linuxppc.org > Subject: EST sbc8260 boot debug > > I have an EST sbc8260 board to boot. After connecting the BDI2000 > > with the board, and power on, everything seems ok. In the config file > > for sbc8260, BR0 is set to 0xFE000801. Then, i modified ppcboot-1.1.6 > > for mpc8260, change the textbase from 0x40000000(flash address) to > > 0x200000(sdram address) and also the FLASH base addr is set > > to 0x200000. I have just one question: why did you not simply use the PPCboot configuration as is? It has been tested and is running fine on the sbc8260 board _without_ modifications. > > Is there any problem with my procdure? Yes. You are meddeling with code which you'd better not touch. > > PS: there is much switchs and JPs on the board, can anyone give an > > proper setting for them under ppcboot environment? Use the default settings. Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de A metaphor is like a simile. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
