Hi, I'm using a MPC5200 based board (namely TQM5200) and the linuxppc_2_4_devel-2005-10-25-1440 kernel from denx.de. To get the serial ports more stable, I've applied the serial port patch by Achim Machura (can be found in http://marc.theaimsgroup.com/?l=linuxppc-embedded&m=112901824515097&w=2). The patch needed small adjustments, but nothing too large -- mostly different line numbers.
Also, to get the first I2C interface to work, I've had to change the file drivers/i2c/i2c-tqm5200.c followingly: -#define MPC5xxx_I2C1_ENABLE 0 /* Disable */ +#define MPC5xxx_I2C1_ENABLE 1 /* Enable */ The code compiles OK, but the I2C bus gets stuck after a short while. Has anyone else experienced something similar? I tried to Google for information but didn't find anything relevant. Maybe I just didn't know the right keywords to search for? Thanks in advance, Kimmo Surakka This message has been scanned by F-Secure Anti-Virus ### OXFORD INSTRUMENTS http://www.oxford-instruments.com/ ### Unless stated above to be non-confidential, this E-mail and any attachments are private and confidential and are for the addressee only and may not be used, copied or disclosed save to the addressee. If you have received this E-mail in error please notify us upon receipt and delete it from your records. Internet communications are not secure and Oxford Instruments is not responsible for their abuse by third parties nor for any alteration or corruption in transmission.
