Hi, I'm a new member on this list. I've been trying to get my Sandpoint X3B/mpmc7447 to boot a stock Linux kernel from kernel.org (tried 2.6.14 and 2.6.16). I'm running into a boot issue, I load zImage.elf (using DINK32 v13.1.1) - I get the "Linux/PPC load:" prompt and then nothing (no more text, and no more serial port response).
I been searching through the archives - I did come across one email that mentioned that Motorola(Freescale) started to ship Sandpoint X3B's with serial #'s > 6000 with "different" switch settings (my board has a serial # greater than 6000). I haven't changed any switch settings from the defaults, the comments in arch/ppc/platforms/sandpoint.c seem to make reference to switch settings for the X1/2 board - but nothing about the X3B. In all my searching I have yet to find any reference to what the switch settings for the X3B rev should be for Linux. If anyone has any pointers regarding the switch settings for the X3B - or anything else that might help - I would appreciate any help I can get. Here's my environment: Development Environment: ------------------------------------- RedHat Enterprise Linux 4.0 ELDK 4.0 cross devlopment tools (I'm successufully building zImage for sandpoint_defconfig and cross compiling for ppc_74xx-) build steps: export CROSS_COMPILE=ppc_74xx- make ARCH=ppc CROSS_COMPILE=ppc_74xx- sandpoint_defconfig make ARCH=ppc CROSS_COMPILE=ppc_74xx- zImage Board: --------- Sandpoint X3B , serial # > 6000 DINK32 v13.1.1 Altimus (MPMC7447) v1.1 Memory: Map B (CHRP) 128MB at CL3 Thanks, -Simon. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20060503/3d62e5f3/attachment.htm
