On Fri, May 19, 2006 at 10:08:26AM +0200, Steven Scholz wrote: > Eugene, > > >> what is the resolution of gettimeofday() for an MPC8xx? > >> > >> IIUC then the "decrementer" is used to generate the timer interrupts every > >> 10ms. > >> > >> This decrementer runs at cpuclk/16. Thus with 80MHz CPU clock has a > >> resolution of 16/80MHz = 200ns and overflows every 50000 ticks. > >> > >> But is this decrementer used to update xtime? > >> Will gettimeofday() have a resolution of 200ns? > >> > >> How about linux 2.4 where xtime is a "struct timeval" rather then "struct > >> timespec"? > >> > > > > Usually on PPC we use timebase to interpolate time between Decrementer > > interrupts. In this case gettimeofday resolution is determined by > > timebase resolution which is quite high (megahertz range). > > Sorry. I don't understand. What do you mean with "timebase"? Is there a > second timer/counter?
PowerPC has a facility called timebase. This is 64-bit counter which can be accessed using special instructions (mftb, mftbu on 32-bit PPC). Counter resolution depends on particular chip implementation, some use core clock, other use bus clock... It's similar to the time-stamp counter in Intel CPUs (accessed with rdtsc instruction). Please, refer to PPC arch manuals for more information. Also, if you really interested in how gettimeofday() is implemented, why don't you look at the source code yourself? -- Eugene
