On Mon, 2006-05-22 at 15:33 +0200, Ladislav Klenovi? wrote: > Hi, > can anybody help me to setup the SCC1 port as serial console on MPC860 > with kernel 2.6.15.4? I would like to use it as system console during > the booting proccess. I can not get any output on serial console during > booting proccess, I use uboot.
What are your kernel command line arguments? Are you passing the right ones in? Have you configured the SCC correctly in the kernel? Chosen SCC1? Baud rates correct? etc. Does your hardware need any special tweaks to the SCC code that is in u-boot but not your kernel? Jeff Angielski The PTR Group
