> I'm experiencing the following error with a BDI 2000 connected to the > JTAG port on a A&M Rattler 8250 board. I was wondering if this is a > hardware problem, or if I have the wrong configuration set up. The > following are a telnet session transcript, the BDI configuration file, > and the register configuration file. > > Thanks > > BDI Telnet Session Transcript (repeats endlessly): > > - TARGET: processing user reset request > *** TARGET: resetting target failed > # PPC: unexpected response from target > - TARGET: target will be restarted in 10 sec > > rattler8250pci.cfg: > > ;bdiGDB configuration file for rattler > ; ------------------------------------------------------ > ; > [INIT] > ;WREG MSR 0x00001002 ; set up MSR > ;WSPR 1008 0 ; turn off caches === > > WM32 0x000101A8 0x00f00000 ; IMMR == 0xFF000000
Type, or are you setting IMMR to 0xf0000000 ?
