Hello again! I had a little mistake in my first mail. I have copied the whole BSP... Now i have tried to copy only the xparameters_ml403.h in arch/ppc/platforms/4xx/xparameters/ but get the same error!!
I would be more then happy when somebody could help me. nice greetings Robert -------- Original-Nachricht -------- Datum: Thu, 15 Jun 2006 12:20:55 +0200 Von: "Karl Pr?fer" <heiguga at gmx.net> An: linuxppc-embedded at ozlabs.org Betreff: xilinx ml403 with 2.6 Kernel > Hallo! > > I am not perfect in english, so please forgice me my mistakes... > > I am trying to get the 2.6 kernel running on my ml403 board... > > 1. I downloaded paulus tree: > cg-clone git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc.git > myprojectdir > > > 2. I copied my Xilinx BSP in the kernel dir > cp -ra <BSPDIR>/* <KERNELDIR>/ > > > 3. I configured the Makefile to use my crosscompiler and the ppc Arch. > I have built a crosstoolchain for a 2.4.26 kernel in past (with crosstool > 0.42). > I know that this toolchain works with a 2.4 kernel... > > Can i use this toolchain to compile the 2.6 kernel?? > Why do i need a kernel(some headers) to build the croostoolchain?? > > > 4. Then I configured the kernel: > # > # Automatically generated make config: don't edit > # Linux kernel version: 2.6.17-rc5 > # Wed Jun 14 10:02:22 2006 > # > CONFIG_MMU=y > CONFIG_GENERIC_HARDIRQS=y > CONFIG_RWSEM_XCHGADD_ALGORITHM=y > CONFIG_GENERIC_HWEIGHT=y > CONFIG_GENERIC_CALIBRATE_DELAY=y > CONFIG_PPC=y > CONFIG_PPC32=y > CONFIG_GENERIC_NVRAM=y > CONFIG_GENERIC_FIND_NEXT_BIT=y > CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y > CONFIG_ARCH_MAY_HAVE_PC_FDC=y > > # > # Code maturity level options > # > CONFIG_EXPERIMENTAL=y > CONFIG_BROKEN_ON_SMP=y > CONFIG_INIT_ENV_ARG_LIMIT=32 > > # > # General setup > # > CONFIG_LOCALVERSION="" > # CONFIG_LOCALVERSION_AUTO is not set > # CONFIG_SWAP is not set > CONFIG_SYSVIPC=y > CONFIG_POSIX_MQUEUE=y > # CONFIG_BSD_PROCESS_ACCT is not set > CONFIG_SYSCTL=y > # CONFIG_AUDIT is not set > # CONFIG_IKCONFIG is not set > # CONFIG_RELAY is not set > CONFIG_INITRAMFS_SOURCE="" > # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set > # CONFIG_EMBEDDED is not set > CONFIG_KALLSYMS=y > # CONFIG_KALLSYMS_ALL is not set > # CONFIG_KALLSYMS_EXTRA_PASS is not set > CONFIG_HOTPLUG=y > CONFIG_PRINTK=y > CONFIG_BUG=y > CONFIG_ELF_CORE=y > CONFIG_BASE_FULL=y > CONFIG_FUTEX=y > CONFIG_EPOLL=y > CONFIG_SHMEM=y > CONFIG_SLAB=y > # CONFIG_TINY_SHMEM is not set > CONFIG_BASE_SMALL=0 > # CONFIG_SLOB is not set > > # > # Loadable module support > # > CONFIG_MODULES=y > CONFIG_MODULE_UNLOAD=y > # CONFIG_MODULE_FORCE_UNLOAD is not set > CONFIG_MODVERSIONS=y > # CONFIG_MODULE_SRCVERSION_ALL is not set > CONFIG_KMOD=y > > # > # Block layer > # > # CONFIG_LBD is not set > # CONFIG_BLK_DEV_IO_TRACE is not set > # CONFIG_LSF is not set > > # > # IO Schedulers > # > CONFIG_IOSCHED_NOOP=y > CONFIG_IOSCHED_AS=y > CONFIG_IOSCHED_DEADLINE=y > CONFIG_IOSCHED_CFQ=y > CONFIG_DEFAULT_AS=y > # CONFIG_DEFAULT_DEADLINE is not set > # CONFIG_DEFAULT_CFQ is not set > # CONFIG_DEFAULT_NOOP is not set > CONFIG_DEFAULT_IOSCHED="anticipatory" > > # > # Processor > # > # CONFIG_6xx is not set > CONFIG_40x=y > # CONFIG_44x is not set > # CONFIG_8xx is not set > # CONFIG_E200 is not set > # CONFIG_E500 is not set > # CONFIG_MATH_EMULATION is not set > # CONFIG_KEXEC is not set > # CONFIG_CPU_FREQ is not set > CONFIG_4xx=y > # CONFIG_WANT_EARLY_SERIAL is not set > > # > # IBM 4xx options > # > # CONFIG_BUBINGA is not set > # CONFIG_CPCI405 is not set > # CONFIG_EP405 is not set > # CONFIG_REDWOOD_5 is not set > # CONFIG_REDWOOD_6 is not set > # CONFIG_SYCAMORE is not set > # CONFIG_WALNUT is not set > # CONFIG_XILINX_ML300 is not set > CONFIG_XILINX_ML403=y > CONFIG_IBM405_ERR77=y > CONFIG_IBM405_ERR51=y > CONFIG_XILINX_VIRTEX_4_FX=y > CONFIG_XILINX_VIRTEX=y > CONFIG_EMBEDDEDBOOT=y > # CONFIG_PPC4xx_DMA is not set > CONFIG_PPC_GEN550=y > CONFIG_UART0_TTYS0=y > # CONFIG_UART0_TTYS1 is not set > CONFIG_NOT_COHERENT_CACHE=y > > # > # Platform options > # > # CONFIG_PC_KEYBOARD is not set > # CONFIG_HIGHMEM is not set > # CONFIG_HZ_100 is not set > CONFIG_HZ_250=y > # CONFIG_HZ_1000 is not set > CONFIG_HZ=250 > CONFIG_PREEMPT_NONE=y > # CONFIG_PREEMPT_VOLUNTARY is not set > # CONFIG_PREEMPT is not set > CONFIG_SELECT_MEMORY_MODEL=y > CONFIG_FLATMEM_MANUAL=y > # CONFIG_DISCONTIGMEM_MANUAL is not set > # CONFIG_SPARSEMEM_MANUAL is not set > CONFIG_FLATMEM=y > CONFIG_FLAT_NODE_MEM_MAP=y > # CONFIG_SPARSEMEM_STATIC is not set > CONFIG_SPLIT_PTLOCK_CPUS=4 > CONFIG_BINFMT_ELF=y > # CONFIG_BINFMT_MISC is not set > CONFIG_CMDLINE_BOOL=y > CONFIG_CMDLINE="console=ttyS0,9600 ip=off root=/dev/xsysace/disc0/part3 > rw" > # CONFIG_PM is not set > # CONFIG_SOFTWARE_SUSPEND is not set > CONFIG_SECCOMP=y > CONFIG_ISA_DMA_API=y > > # > # Bus options > # > # CONFIG_PPC_I8259 is not set > # CONFIG_PCI is not set > # CONFIG_PCI_DOMAINS is not set > > # > # PCCARD (PCMCIA/CardBus) support > # > # CONFIG_PCCARD is not set > > # > # Advanced setup > # > # CONFIG_ADVANCED_OPTIONS is not set > > # > # Default settings for advanced configuration options are used > # > CONFIG_HIGHMEM_START=0xfe000000 > CONFIG_LOWMEM_SIZE=0x30000000 > CONFIG_KERNEL_START=0xc0000000 > CONFIG_TASK_SIZE=0x80000000 > CONFIG_CONSISTENT_START=0xff100000 > CONFIG_CONSISTENT_SIZE=0x00200000 > CONFIG_BOOT_LOAD=0x00400000 > > # > # Networking > # > CONFIG_NET=y > > # > # Networking options > # > # CONFIG_NETDEBUG is not set > CONFIG_PACKET=y > # CONFIG_PACKET_MMAP is not set > CONFIG_UNIX=y > CONFIG_XFRM=y > # CONFIG_XFRM_USER is not set > # CONFIG_NET_KEY is not set > CONFIG_INET=y > CONFIG_IP_MULTICAST=y > # CONFIG_IP_ADVANCED_ROUTER is not set > CONFIG_IP_FIB_HASH=y > CONFIG_IP_PNP=y > CONFIG_IP_PNP_DHCP=y > CONFIG_IP_PNP_BOOTP=y > # CONFIG_IP_PNP_RARP is not set > # CONFIG_NET_IPIP is not set > # CONFIG_NET_IPGRE is not set > # CONFIG_IP_MROUTE is not set > # CONFIG_ARPD is not set > CONFIG_SYN_COOKIES=y > CONFIG_INET_AH=y > CONFIG_INET_ESP=y > CONFIG_INET_IPCOMP=y > CONFIG_INET_XFRM_TUNNEL=y > CONFIG_INET_TUNNEL=y > CONFIG_INET_DIAG=y > CONFIG_INET_TCP_DIAG=y > # CONFIG_TCP_CONG_ADVANCED is not set > CONFIG_TCP_CONG_BIC=y > # CONFIG_IPV6 is not set > # CONFIG_INET6_XFRM_TUNNEL is not set > # CONFIG_INET6_TUNNEL is not set > # CONFIG_NETFILTER is not set > > # > # DCCP Configuration (EXPERIMENTAL) > # > # CONFIG_IP_DCCP is not set > > # > # SCTP Configuration (EXPERIMENTAL) > # > # CONFIG_IP_SCTP is not set > > # > # TIPC Configuration (EXPERIMENTAL) > # > # CONFIG_TIPC is not set > # CONFIG_ATM is not set > # CONFIG_BRIDGE is not set > # CONFIG_VLAN_8021Q is not set > # CONFIG_DECNET is not set > # CONFIG_LLC2 is not set > # CONFIG_IPX is not set > # CONFIG_ATALK is not set > # CONFIG_X25 is not set > # CONFIG_LAPB is not set > # CONFIG_NET_DIVERT is not set > # CONFIG_ECONET is not set > # CONFIG_WAN_ROUTER is not set > > # > # QoS and/or fair queueing > # > # CONFIG_NET_SCHED is not set > > # > # Network testing > # > # CONFIG_NET_PKTGEN is not set > # CONFIG_HAMRADIO is not set > # CONFIG_IRDA is not set > # CONFIG_BT is not set > # CONFIG_IEEE80211 is not set > > # > # Device Drivers > # > > # > # Generic Driver Options > # > CONFIG_STANDALONE=y > CONFIG_PREVENT_FIRMWARE_BUILD=y > # CONFIG_FW_LOADER is not set > # CONFIG_DEBUG_DRIVER is not set > > # > # Connector - unified userspace <-> kernelspace linker > # > # CONFIG_CONNECTOR is not set > > # > # Memory Technology Devices (MTD) > # > # CONFIG_MTD is not set > > # > # Parallel port support > # > # CONFIG_PARPORT is not set > > # > # Plug and Play support > # > > # > # Block devices > # > # CONFIG_BLK_DEV_FD is not set > # CONFIG_BLK_DEV_COW_COMMON is not set > # CONFIG_BLK_DEV_LOOP is not set > # CONFIG_BLK_DEV_NBD is not set > CONFIG_BLK_DEV_RAM=y > CONFIG_BLK_DEV_RAM_COUNT=16 > CONFIG_BLK_DEV_RAM_SIZE=4096 > # CONFIG_BLK_DEV_INITRD is not set > # CONFIG_CDROM_PKTCDVD is not set > # CONFIG_ATA_OVER_ETH is not set > > # > # ATA/ATAPI/MFM/RLL support > # > # CONFIG_IDE is not set > > # > # SCSI device support > # > # CONFIG_RAID_ATTRS is not set > # CONFIG_SCSI is not set > > # > # Multi-device support (RAID and LVM) > # > # CONFIG_MD is not set > > # > # Fusion MPT device support > # > # CONFIG_FUSION is not set > > # > # IEEE 1394 (FireWire) support > # > > # > # I2O device support > # > > # > # Macintosh device drivers > # > # CONFIG_WINDFARM is not set > > # > # Network device support > # > CONFIG_NETDEVICES=y > # CONFIG_DUMMY is not set > # CONFIG_BONDING is not set > # CONFIG_EQUALIZER is not set > # CONFIG_TUN is not set > > # > # PHY device support > # > # CONFIG_PHYLIB is not set > > # > # Ethernet (10 or 100Mbit) > # > CONFIG_NET_ETHERNET=y > # CONFIG_MII is not set > # CONFIG_IBM_EMAC is not set > > # > # Ethernet (1000 Mbit) > # > > # > # Ethernet (10000 Mbit) > # > > # > # Token Ring devices > # > > # > # Wireless LAN (non-hamradio) > # > # CONFIG_NET_RADIO is not set > > # > # Wan interfaces > # > # CONFIG_WAN is not set > # CONFIG_PPP is not set > # CONFIG_SLIP is not set > # CONFIG_SHAPER is not set > # CONFIG_NETCONSOLE is not set > # CONFIG_NETPOLL is not set > # CONFIG_NET_POLL_CONTROLLER is not set > > # > # ISDN subsystem > # > # CONFIG_ISDN is not set > > # > # Telephony Support > # > # CONFIG_PHONE is not set > > # > # Input device support > # > CONFIG_INPUT=y > > # > # Userland interfaces > # > CONFIG_INPUT_MOUSEDEV=y > CONFIG_INPUT_MOUSEDEV_PSAUX=y > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 > # CONFIG_INPUT_JOYDEV is not set > # CONFIG_INPUT_TSDEV is not set > # CONFIG_INPUT_EVDEV is not set > # CONFIG_INPUT_EVBUG is not set > > # > # Input Device Drivers > # > CONFIG_INPUT_KEYBOARD=y > CONFIG_KEYBOARD_ATKBD=y > # CONFIG_KEYBOARD_SUNKBD is not set > # CONFIG_KEYBOARD_LKKBD is not set > # CONFIG_KEYBOARD_XTKBD is not set > # CONFIG_KEYBOARD_NEWTON is not set > # CONFIG_INPUT_MOUSE is not set > # CONFIG_INPUT_JOYSTICK is not set > # CONFIG_INPUT_TOUCHSCREEN is not set > CONFIG_INPUT_MISC=y > # CONFIG_INPUT_UINPUT is not set > > # > # Hardware I/O ports > # > CONFIG_SERIO=y > CONFIG_SERIO_I8042=y > CONFIG_SERIO_SERPORT=y > CONFIG_SERIO_LIBPS2=y > # CONFIG_SERIO_RAW is not set > # CONFIG_GAMEPORT is not set > > # > # Character devices > # > CONFIG_VT=y > CONFIG_VT_CONSOLE=y > CONFIG_HW_CONSOLE=y > # CONFIG_SERIAL_NONSTANDARD is not set > > # > # Serial drivers > # > CONFIG_SERIAL_8250=y > CONFIG_SERIAL_8250_CONSOLE=y > CONFIG_SERIAL_8250_NR_UARTS=4 > CONFIG_SERIAL_8250_RUNTIME_UARTS=4 > # CONFIG_SERIAL_8250_EXTENDED is not set > > # > # Non-8250 serial port support > # > CONFIG_SERIAL_CORE=y > CONFIG_SERIAL_CORE_CONSOLE=y > CONFIG_UNIX98_PTYS=y > CONFIG_LEGACY_PTYS=y > CONFIG_LEGACY_PTY_COUNT=256 > > # > # IPMI > # > # CONFIG_IPMI_HANDLER is not set > > # > # Watchdog Cards > # > # CONFIG_WATCHDOG is not set > # CONFIG_NVRAM is not set > # CONFIG_GEN_RTC is not set > # CONFIG_DTLK is not set > # CONFIG_R3964 is not set > > # > # Ftape, the floppy tape device driver > # > # CONFIG_AGP is not set > # CONFIG_RAW_DRIVER is not set > > # > # TPM devices > # > # CONFIG_TCG_TPM is not set > # CONFIG_TELCLOCK is not set > > # > # I2C support > # > # CONFIG_I2C is not set > > # > # SPI support > # > # CONFIG_SPI is not set > # CONFIG_SPI_MASTER is not set > > # > # Dallas's 1-wire bus > # > # CONFIG_W1 is not set > > # > # Hardware Monitoring support > # > # CONFIG_HWMON is not set > # CONFIG_HWMON_VID is not set > > # > # Misc devices > # > > # > # Multimedia devices > # > # CONFIG_VIDEO_DEV is not set > CONFIG_VIDEO_V4L2=y > > # > # Digital Video Broadcasting Devices > # > # CONFIG_DVB is not set > > # > # Graphics support > # > # CONFIG_FB is not set > > # > # Console display driver support > # > CONFIG_DUMMY_CONSOLE=y > > # > # Sound > # > # CONFIG_SOUND is not set > > # > # USB support > # > # CONFIG_USB_ARCH_HAS_HCD is not set > # CONFIG_USB_ARCH_HAS_OHCI is not set > # CONFIG_USB_ARCH_HAS_EHCI is not set > > # > # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' > # > > # > # USB Gadget Support > # > # CONFIG_USB_GADGET is not set > > # > # MMC/SD Card support > # > # CONFIG_MMC is not set > > # > # LED devices > # > # CONFIG_NEW_LEDS is not set > > # > # LED drivers > # > > # > # LED Triggers > # > > # > # InfiniBand support > # > > # > # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) > # > > # > # Real Time Clock > # > # CONFIG_RTC_CLASS is not set > > # > # File systems > # > CONFIG_EXT2_FS=y > # CONFIG_EXT2_FS_XATTR is not set > # CONFIG_EXT2_FS_XIP is not set > CONFIG_EXT3_FS=y > CONFIG_EXT3_FS_XATTR=y > # CONFIG_EXT3_FS_POSIX_ACL is not set > # CONFIG_EXT3_FS_SECURITY is not set > CONFIG_JBD=y > # CONFIG_JBD_DEBUG is not set > CONFIG_FS_MBCACHE=y > CONFIG_REISERFS_FS=y > # CONFIG_REISERFS_CHECK is not set > # CONFIG_REISERFS_PROC_INFO is not set > # CONFIG_REISERFS_FS_XATTR is not set > # CONFIG_JFS_FS is not set > # CONFIG_FS_POSIX_ACL is not set > # CONFIG_XFS_FS is not set > # CONFIG_OCFS2_FS is not set > # CONFIG_MINIX_FS is not set > # CONFIG_ROMFS_FS is not set > CONFIG_INOTIFY=y > # CONFIG_QUOTA is not set > CONFIG_DNOTIFY=y > # CONFIG_AUTOFS_FS is not set > # CONFIG_AUTOFS4_FS is not set > # CONFIG_FUSE_FS is not set > > # > # CD-ROM/DVD Filesystems > # > # CONFIG_ISO9660_FS is not set > # CONFIG_UDF_FS is not set > > # > # DOS/FAT/NT Filesystems > # > CONFIG_FAT_FS=y > CONFIG_MSDOS_FS=y > CONFIG_VFAT_FS=y > CONFIG_FAT_DEFAULT_CODEPAGE=437 > CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" > # CONFIG_NTFS_FS is not set > > # > # Pseudo filesystems > # > CONFIG_PROC_FS=y > # CONFIG_PROC_KCORE is not set > CONFIG_SYSFS=y > CONFIG_TMPFS=y > # CONFIG_HUGETLB_PAGE is not set > CONFIG_RAMFS=y > # CONFIG_CONFIGFS_FS is not set > > # > # Miscellaneous filesystems > # > # CONFIG_ADFS_FS is not set > # CONFIG_AFFS_FS is not set > # CONFIG_HFS_FS is not set > # CONFIG_HFSPLUS_FS is not set > # CONFIG_BEFS_FS is not set > # CONFIG_BFS_FS is not set > # CONFIG_EFS_FS is not set > # CONFIG_CRAMFS is not set > # CONFIG_VXFS_FS is not set > # CONFIG_HPFS_FS is not set > # CONFIG_QNX4FS_FS is not set > # CONFIG_SYSV_FS is not set > # CONFIG_UFS_FS is not set > > # > # Network File Systems > # > CONFIG_NFS_FS=y > CONFIG_NFS_V3=y > # CONFIG_NFS_V3_ACL is not set > # CONFIG_NFS_V4 is not set > # CONFIG_NFS_DIRECTIO is not set > CONFIG_NFSD=y > # CONFIG_NFSD_V3 is not set > # CONFIG_NFSD_TCP is not set > # CONFIG_ROOT_NFS is not set > CONFIG_LOCKD=y > CONFIG_LOCKD_V4=y > CONFIG_EXPORTFS=y > CONFIG_NFS_COMMON=y > CONFIG_SUNRPC=y > # CONFIG_RPCSEC_GSS_KRB5 is not set > # CONFIG_RPCSEC_GSS_SPKM3 is not set > # CONFIG_SMB_FS is not set > # CONFIG_CIFS is not set > # CONFIG_NCP_FS is not set > # CONFIG_CODA_FS is not set > # CONFIG_AFS_FS is not set > # CONFIG_9P_FS is not set > > # > # Partition Types > # > # CONFIG_PARTITION_ADVANCED is not set > CONFIG_MSDOS_PARTITION=y > > # > # Native Language Support > # > CONFIG_NLS=y > CONFIG_NLS_DEFAULT="iso8859-1" > CONFIG_NLS_CODEPAGE_437=m > # CONFIG_NLS_CODEPAGE_737 is not set > # CONFIG_NLS_CODEPAGE_775 is not set > # CONFIG_NLS_CODEPAGE_850 is not set > # CONFIG_NLS_CODEPAGE_852 is not set > # CONFIG_NLS_CODEPAGE_855 is not set > # CONFIG_NLS_CODEPAGE_857 is not set > # CONFIG_NLS_CODEPAGE_860 is not set > # CONFIG_NLS_CODEPAGE_861 is not set > # CONFIG_NLS_CODEPAGE_862 is not set > # CONFIG_NLS_CODEPAGE_863 is not set > # CONFIG_NLS_CODEPAGE_864 is not set > # CONFIG_NLS_CODEPAGE_865 is not set > # CONFIG_NLS_CODEPAGE_866 is not set > # CONFIG_NLS_CODEPAGE_869 is not set > # CONFIG_NLS_CODEPAGE_936 is not set > # CONFIG_NLS_CODEPAGE_950 is not set > # CONFIG_NLS_CODEPAGE_932 is not set > # CONFIG_NLS_CODEPAGE_949 is not set > # CONFIG_NLS_CODEPAGE_874 is not set > # CONFIG_NLS_ISO8859_8 is not set > # CONFIG_NLS_CODEPAGE_1250 is not set > # CONFIG_NLS_CODEPAGE_1251 is not set > # CONFIG_NLS_ASCII is not set > CONFIG_NLS_ISO8859_1=m > # CONFIG_NLS_ISO8859_2 is not set > # CONFIG_NLS_ISO8859_3 is not set > # CONFIG_NLS_ISO8859_4 is not set > # CONFIG_NLS_ISO8859_5 is not set > # CONFIG_NLS_ISO8859_6 is not set > # CONFIG_NLS_ISO8859_7 is not set > # CONFIG_NLS_ISO8859_9 is not set > # CONFIG_NLS_ISO8859_13 is not set > # CONFIG_NLS_ISO8859_14 is not set > # CONFIG_NLS_ISO8859_15 is not set > # CONFIG_NLS_KOI8_R is not set > # CONFIG_NLS_KOI8_U is not set > # CONFIG_NLS_UTF8 is not set > > # > # IBM 40x options > # > > # > # Library routines > # > # CONFIG_CRC_CCITT is not set > # CONFIG_CRC16 is not set > # CONFIG_CRC32 is not set > # CONFIG_LIBCRC32C is not set > CONFIG_ZLIB_INFLATE=y > CONFIG_ZLIB_DEFLATE=y > # CONFIG_PROFILING is not set > > # > # Kernel hacking > # > # CONFIG_PRINTK_TIME is not set > CONFIG_MAGIC_SYSRQ=y > CONFIG_DEBUG_KERNEL=y > CONFIG_LOG_BUF_SHIFT=14 > CONFIG_DETECT_SOFTLOCKUP=y > # CONFIG_SCHEDSTATS is not set > # CONFIG_DEBUG_SLAB is not set > # CONFIG_DEBUG_MUTEXES is not set > # CONFIG_DEBUG_SPINLOCK is not set > # CONFIG_DEBUG_SPINLOCK_SLEEP is not set > # CONFIG_DEBUG_KOBJECT is not set > # CONFIG_DEBUG_INFO is not set > # CONFIG_DEBUG_FS is not set > # CONFIG_DEBUG_VM is not set > CONFIG_FORCED_INLINING=y > # CONFIG_RCU_TORTURE_TEST is not set > # CONFIG_KGDB is not set > # CONFIG_XMON is not set > # CONFIG_BDI_SWITCH is not set > # CONFIG_SERIAL_TEXT_DEBUG is not set > > # > # Security options > # > # CONFIG_KEYS is not set > # CONFIG_SECURITY is not set > > # > # Cryptographic options > # > CONFIG_CRYPTO=y > CONFIG_CRYPTO_HMAC=y > # CONFIG_CRYPTO_NULL is not set > # CONFIG_CRYPTO_MD4 is not set > CONFIG_CRYPTO_MD5=y > CONFIG_CRYPTO_SHA1=y > # CONFIG_CRYPTO_SHA256 is not set > # CONFIG_CRYPTO_SHA512 is not set > # CONFIG_CRYPTO_WP512 is not set > # CONFIG_CRYPTO_TGR192 is not set > CONFIG_CRYPTO_DES=y > # CONFIG_CRYPTO_BLOWFISH is not set > # CONFIG_CRYPTO_TWOFISH is not set > # CONFIG_CRYPTO_SERPENT is not set > # CONFIG_CRYPTO_AES is not set > # CONFIG_CRYPTO_CAST5 is not set > # CONFIG_CRYPTO_CAST6 is not set > # CONFIG_CRYPTO_TEA is not set > # CONFIG_CRYPTO_ARC4 is not set > # CONFIG_CRYPTO_KHAZAD is not set > # CONFIG_CRYPTO_ANUBIS is not set > CONFIG_CRYPTO_DEFLATE=y > # CONFIG_CRYPTO_MICHAEL_MIC is not set > # CONFIG_CRYPTO_CRC32C is not set > # CONFIG_CRYPTO_TEST is not set > > # > # Hardware crypto devices > # > > > > > > > > 5. I tried to compile the kernel: > make clean bzImage modules > > and get this error: > # Temporary hack until we have migrated to asm-powerpc > CLEAN /home/freaked/WORK/ppc_kernel_2_6_paulus > CLEAN arch/ppc/kernel > CLEAN init > CLEAN usr > CLEAN .tmp_versions > CLEAN .tmp_gas_check > CHK include/linux/version.h > HOSTCC scripts/basic/fixdep > HOSTCC scripts/basic/split-include > HOSTCC scripts/basic/docproc > HOSTCC scripts/kconfig/conf.o > HOSTCC scripts/kconfig/kxgettext.o > HOSTCC scripts/kconfig/mconf.o > HOSTCC scripts/kconfig/zconf.tab.o > HOSTLD scripts/kconfig/conf > scripts/kconfig/conf -s arch/ppc/Kconfig > # > # using defaults found in .config > # > SPLIT include/linux/autoconf.h -> include/config/* > CC arch/ppc/kernel/asm-offsets.s > GEN include/asm-ppc/asm-offsets.h > HOSTCC scripts/genksyms/genksyms.o > HOSTCC scripts/genksyms/lex.o > HOSTCC scripts/genksyms/parse.o > HOSTLD scripts/genksyms/genksyms > CC scripts/mod/empty.o > HOSTCC scripts/mod/mk_elfconfig > MKELF scripts/mod/elfconfig.h > HOSTCC scripts/mod/file2alias.o > HOSTCC scripts/mod/modpost.o > HOSTCC scripts/mod/sumversion.o > HOSTLD scripts/mod/modpost > HOSTCC scripts/kallsyms > HOSTCC scripts/conmakehash > CC init/main.o > CHK include/linux/compile.h > UPD include/linux/compile.h > CC init/version.o > CC init/do_mounts.o > CC init/do_mounts_rd.o > LD init/mounts.o > CC init/initramfs.o > CC init/calibrate.o > LD init/built-in.o > HOSTCC usr/gen_init_cpio > GEN usr/initramfs_data.cpio.gz > AS usr/initramfs_data.o > LD usr/built-in.o > AS arch/ppc/kernel/entry.o > CC arch/ppc/kernel/traps.o > CC arch/ppc/kernel/time.o > AS arch/ppc/kernel/misc.o > CC arch/ppc/kernel/setup.o > CC arch/ppc/kernel/ppc_htab.o > CC arch/ppc/kernel/ppc_ksyms.o > CC arch/ppc/kernel/dma-mapping.o > LD arch/ppc/kernel/built-in.o > AS arch/ppc/kernel/head_4xx.o > LDS arch/ppc/kernel/vmlinux.lds > CC arch/powerpc/kernel/semaphore.o > CC arch/powerpc/kernel/cputable.o > CC arch/powerpc/kernel/ptrace.o > CC arch/powerpc/kernel/syscalls.o > CC arch/powerpc/kernel/irq.o > CC arch/powerpc/kernel/align.o > CC arch/powerpc/kernel/signal_32.o > arch/powerpc/kernel/signal_32.c: In function `handle_rt_signal': > arch/powerpc/kernel/signal_32.c:763: error: request for member `vdso_base' > in something not a structure or union > arch/powerpc/kernel/signal_32.c:766: error: request for member `vdso_base' > in something not a structure or union > arch/powerpc/kernel/signal_32.c: In function `handle_signal': > arch/powerpc/kernel/signal_32.c:1037: error: request for member > `vdso_base' in something not a structure or union > arch/powerpc/kernel/signal_32.c:1040: error: request for member > `vdso_base' in something not a structure or union > make[1]: *** [arch/powerpc/kernel/signal_32.o] Fehler 1 > make: *** [arch/powerpc/kernel] Fehler 2 > > > > > > > > Could someone please help me to interprete this error?? > Could someone send me an working .config file for the kernel? > > I would be more then happy when someone could help me!! > Thanks in advanced!! > > greetings Robert Zach > heiguga at gmx.net > > > -- > > > Echte DSL-Flatrate dauerhaft f?r 0,- Euro*! > "Feel free" mit GMX DSL! http://www.gmx.net/de/go/dsl > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded at ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded -- Echte DSL-Flatrate dauerhaft f?r 0,- Euro*! "Feel free" mit GMX DSL! http://www.gmx.net/de/go/dsl
