Hi Xavier, I'm trying to get running linux 2.6.17 on my ML403 board (Virtex-4) but I'm having some trouble with the MMU initialization... This my message to the ML:
http://ozlabs.org/pipermail/linuxppc-embedded/2006-June/023321.html Did you have similar problems? Have you any idea that could help me? Thank you so much. About your question: Xavier Grave ha scritto: > Hi, > > I'm currently running linux with 10/100 MBits xilinx ethernet driver. I > have a memec 2VP20 evaluation board. > We have bought a PCOM2 module in order to have a Gb PHY. I have > implemented an hardware to handle it but whatever linux version I take > (2.4 from denx web site, 2.6.17 from kernel.org), I can't configure a Gb > ethernet driver. And the 10/100 driver don't configure my Gb PHY... > > I have compiled my linux kernel based on the ml300 configuration default > config. > > Does anyone has an idea ? This is a patch for ML403 board, it adds the linux 2.6 driver for TEMAC. http://ozlabs.org/pipermail/linuxppc-embedded/2006-March/022365.html Hope this helps. > > Thanks, xavier > > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded at ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > > Regards, Filippo Capurso -- DAVE Srl - Electronics System House via Forniz 2/1 33080 Porcia (PN) - Italy Telephone: +39.0434.921215 Telefax: +39.0434.1994030 Freefax: +39.02.700520062 web: www.dave-tech.it e-mail: filippo.capurso at dave-tech.it how to reach us: http://mail.map24.com/dave
