Hi.
I am trying to use MTD on my board.
I have two flash AMD LV160BB that are configured in 16 bits.
They are in parallel so I have got a 32 bits bus wide.
Each flash is 2 Mo . So the total is 4 Mo.
My flash starts at @ : 0x04000000.
So in the configuration for Linux I set
CFI : yes
Start @ : 0x04000000
Size : 0x00400000
Bus Width : 4
The result at the boot is :
physmap flash device: 400000 at 4000000
Amd/Fujitsu Extended Query Table v1.0 at 0x0040
number of JEDEC chips: 1
0: offset=0x0,size=0x8000,blocks=1
1: offset=0x8000,size=0x4000,blocks=2
2: offset=0x10000,size=0x10000,blocks=1
3: offset=0x20000,size=0x20000,blocks=31
mtd: Giving out device 0 to Physically mapped flash
Is it correct ?
Why is there only one JEDEC Chip detected ?
Regards
Chris
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
