Yes we have designed a board Adder II + the ppc-linux-kernel-2.4.21p7-1 kernel is in the development tree
What help do you need ? You could just by the board it has every thing and is priced fairly agreeable....? Regards Frank Robbins Analogue & Micro Ltd, 9 Clytha Park Road Newport South Wales NP20 4US United Kingdom (Great Britain) Email : Frank.Robbins at Analogue-Micro.com Email : Frank at Analogue-Micro.com http://www.Analogue-Micro.com Tel: 44 (0)1633 666787 Fax: 44 (0)1633 666788 ----- Original Message ----- From: "David Jander" <[EMAIL PROTECTED]> To: <linuxppc-embedded at lists.linuxppc.org> Sent: Tuesday, June 17, 2003 12:14 PM Subject: Support for MPC852T, any experience ? > > Hi there, > > We are developing a board based on the MPC852T (fairly new model, > stripped-down MPC866). > Is there anybody who has sucessfully run linux-ppc on this processor yet (or > it's more advanced MPC866 cousin) ? > Any experience ? > I am specifically interested in using the SPI mode for SCC3 or 4, plus FEC > with an LXT971A phy. > I am new to this mailing list, but I have searched through its archive and > came up with a (simple ?) SPI driver from Navin Bopurri. > Also on the DENX website I found their drivers for 8xx in the 2.4.4 kernel > sources. Has anybody ported those drivers to a more recent version ? > I have now managed to set up a cross-development system comiling the latest > binutils, gcc-3.2.3 (--with-newlib) and the latest linuxppc_2_4_devel kernel > from montavista. I have not been able to find an up to date guide for setting > up such a system (I had to sweat my own way through it). If there is such a > guide (the Howto's I could find seem hopelessly outdated), could someone > please provide a pointer ? Otherwise, I would be glad to offer my experience > from this point on for a FAQ or (somwhat more up-to-date) mini-howto. Any > ideas ? > > Greetings, > > -- > David Jander > Protonic Holland. > > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
