do you have any FPGA or CPLD on your board. if it is, your kernel should have delay time before loading FPGA or CPLD image. Maybe halt has completed this action.
-----Original Message----- From: owner-linuxppc-embedded at lists.linuxppc.org [mailto:owner-linuxppc-embedded at lists.linuxppc.org]On Behalf Of [EMAIL PROTECTED] Sent: Thursday, June 19, 2003 5:19 PM To: linuxppc-embedded at lists.linuxppc.org Subject: [Linux] Problem with booting Linux Hi. I am working on Linux on a 860 target. I use UBoot as bootloader & a BDI2000. In Bdi, if I make reset run go Then in Uboot bootm 0x43000000 Linux hangs when trying to start init. In Bdi, if I make reset run halt go Then in Uboot bootm 0x43000000 Linux works fine It seems that the fact to make a halt before running makes the init works !!! Ever seen that ? Ideas ? Thanks Chris ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
