In message <20060328000703.GA95672 at server.idefix.loc> you wrote: > > I installed today ELDK 4.0 for the LITE5200 board (icecube).
There is no "ELDK 4.0 for the LITE5200 board". > ./install -d /usr/local/eldk ppc_6xx This installas ELDK 4.0 for PPC 6xx processors. Nothing less, but nothing more either. > After compiling u-boot and playing a little bit with it, i tried to > compile the kernel 2.6. Which kernel tree are you using? There is no support for MPC5200 in the DENX Linux tree. Well, some code is there, as there is in the public 2.6 kernel tree, but it's known to be broken and not supported by us. > For this I used the git repository. Which one? > I copied the file arch/ppc/configs/lite5200_defconfig to .config, and > tried the following one: > make ARCH=ppc CROSS_COMPILE=ppc_6xx- uImage That's not the official way to build images. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de We, the unwilling, led by the unknowing, are doing the impossible for the ungrateful. We have done so much, for so long, with so little, we are now qualified to do anything with nothing.
