Hi, Yesterday I tried to compile kernel with linux-2.4.27 and linux-2.6.17 for PowerPC405EP board. Both of the kernel images were created successfully, but when I tested them in ram from u-boot with NFS used. Both of the images could not booted from ram. The two kernel .config files are attached.
For the 2.4.27 kernel, after running bootm in u-boot and "Uncompressing Kernel Image ... OK" printed on the screen. There are "vector: 200 at pc = c0197d4c, lr = c0197d40 msr = 1030, sp = c0181fb0 [c0181f00] current = c0180020, pid = 0, comm = swapper mon>". It seemd the booting process had entered a monitor, but I didn't know what it was. For the 2.6.17 kernel, after running bootm in u-boot, the booting process stops at "Uncompressing Kernel Image ... OK". No other output after this sentence on the screen. Would you like to give some advice about this? Thanks a lot. Zhou Rui Distributed & Embedded System Lab School of Information Science & Engineering Lanzhou University, P. R. China http://dslab.lzu.edu.cn/~zr/ --------------------------------- ??????-3.5G???20M?? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20060712/60cc7f0f/attachment.htm -------------- next part -------------- A non-text attachment was scrubbed... Name: 20060711.2.4.27.kernel.config Type: application/octet-stream Size: 12770 bytes Desc: 965622162-20060711.2.4.27.kernel.config Url : http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20060712/60cc7f0f/attachment.obj -------------- next part -------------- A non-text attachment was scrubbed... Name: 20060711.2.6.17.kernel.config Type: application/octet-stream Size: 14766 bytes Desc: 4102441076-20060711.2.6.17.kernel.config Url : http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20060712/60cc7f0f/attachment-0001.obj
