Hi all, I have to port Linux on a Sandpoint Board wtih a MPC8241 processor on. I built a kernel using linux 2.6.15 and create an zImage.initrd.elf with a ramdisk. All of this (linux and ramdisk) was packaged with ELDK 4.0. I also minimized everything in the .config file to only have what is really necessary (serial port, 6xx processor, etc). The communication is made with the board by its internal serial port and Dink32 is used to do everything else.
The problem is that when I execute the loaded zImage.initrd.elf, the boot sequence just hangs there and I just don't see anything happening. There is nothing that is displayed. I know that the elf file as an offset header of 0X10000, so the problem is not there. I also put some breakpoints and trace using Dink32 to see where it stops and it may have something to do with the disable_6xx_mmu in the utils.S file. I just really don't know what's wrong in my config and I hope someone could help me on this. Thank you Benoit Lajoie-Dorval
