Mr, Denk >But if you tested so many devices, and none of them is working, then >this is probably an indication of another problem.
It might be, but I can not figure out what it is. I am hoping it is just a kernel configuration mater. >Do you have a chance to try a different board? Did you ever >succesfully use *any* USB device on your board? Maybe there is a >hardware problem on your system. I just have one icecube board (Lite5200 Ver 2.0), and I have 4 of our own custom boards designed after the icecube. Right now I am testing on the icecube board. I tried our boards but usb as mass storage is not working there either. >Ummm... stupid question: is the green LED behind the USB connector on >your board on or off? There is one and it was off, I shorted out R164 and the led came on. Our custom board takes care of this as well Which defconfig file should I use? I just tried the icecube_5200_CoralP_defconfig file but now the board is not booting; it hangs right after this message: "Uncompressing Kernel Image ... OK" Thanks, Orges PS. >Argh... your message is very difficult to read, as there is no difference >between your text and mine. I assumed that outlook would do it automatically, but apparently it did not, sorry about that. >Also, please don't send separate mesages to the original poster and the >mailing list; use Cc: instead. I hit "reply" instead of "reply all" by mistake; sorry about that too, I will not happen again.
