Hi,
I 've installed PPCBOOT1.2 (eldk2.0), it runs OK.
Now I have generate a kernel Linux2.4.4, so I follow these steps:
->in the file /linux-2.4.4/include/asm-ppc/mpc8260ads/mpc8260ads.h
I add: #include <asm/ppcboot.h> /*as I read on the forum*/
#define PHY_INTERRUPT 25
#define IMAP_ADDR 0x04700000
->make config
->make dep
->make pImage
->Then with my ppcboot, I load the kernel, and the ramdisk(simple ramdisk).
->I try to run the kernel: and print "Uncompressing OK..."
"Transferring OK..." and it hangs.
I know some people had this problem. And you said that the bd structure had to
be the same as defined in the ppcboot.
So you advice to put "#include <asm/ppcboot.h>" in
/linux-2.4.4/include/asm-ppc/mpc8260ads/mpc8260ads.h
The file /linux-2.4.4/include/asm-ppc/ppcboot.h have in the bd struct
definition a line "mon_fnc_t *bi_mon_fnv".
So if someone has a solution to this problem, please tell me.
thanks.
Nota: PPCBOOT is very fine!
greggiraud at netcourrier.com
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
