In 8260_io/uart.c and include/asm-ppc/cpm_8260.h, I couldn't find references to the BRK/BRKE event/mask bits of the SMCE/SMCM register. Could it be because of this, that the break detection does not happen for (1) and (2)?
Best regards, -Arun. On Saturday 12 April 2003 07:26 pm, Arun Dharankar wrote: > Hello... > > 1. After making sure that the stty/termio settings on the console port > have "brkint", I tried sending a break (kermit, minicom and reverse > telnet on BDI). The break does not seem to generate SIGINT. > > What could I be missing, or doing wrong? Or is my understanding > incorrect of the brkint termio flag? > > > 2. I would like to use the SAK/sysrq on the serial console. One thing > seems to be missing is ASYNC_SAK flag in the ser_info_t->flags. > So, I added it in the 8260_io/uart.c:startup(...). Also, made sure > that /proc/sys/kernel/sysrq has "1" in it. With this much, I tried > sending a break on the console followed by "t" (and other SAK feature > keys). No luck. > > Could this be related to (1) above? What about the missing flag > ASYNC_SAK in the ser_info_t info struct? > > > 3. During Linux kernel bootup, ppc_md.progress(...) is called in a number > of places. This is before the serial console is initialized. On the > 8260 configuration, the ppc_md.progress(...) is NULL. Has this been > been fixed by anyone for the 8260 configuration? > > On the board I use, PPCBoot is the bootloader/monitor. So, I copied > over the serial_putc()/serial_puts() routines to uart.c (ofcourse, the > modified to use the same DPRAM settings/addresses as used by > PPCBoot. > > With BDI, I can see that this ppc_md.progress()-->serial_puts()--> > serial_putc() is called. But, > volatile cbd_t tbdf = (cbd_t *)&im->im_dprambase[up->smc_tbase]; > Seems to cause an exception in machine_init() the first time it is > called. Also, up does point to 0xf0000040 (in IMAP/IMMR). > > My guess is that this is do with the address translations which are > not setup at this instance during startup. I am not sure how to fix > this - if this is the case. How do I get this to work? > > > Best regards, > -Arun. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
