Hi all, i read the lists and some manuals but i can't find any solution that fit to my problem. I use ppcboot-1.1.4 (yes i know, there is a newer one :-) an the kernel-sources 2.4.17 (from ftp.kernel.org). As HW i use a MPX8xxFADS with an 855T on it:
-PPCBoot 1.1.4 (Mar 25 2002 - 11:33:16) -CPU: XPC860xxZPnnD3 at 49.800 MHz: 4 kB I-Cache 4 kB D-Cache FEC present -Board: FADS with db MPC821, MPC860 / MPC860SAR / MPC860T rev ENG or PILOT -DRAM: (4 MB SDRAM) 12 MB -FLASH: 2 MB -In: serial -Out: serial -Err: serial The boot messages looking like this: =>bootm 0200000 ## Booting image at 00200000 ... Image Name: 2.4.17 Ver.0.2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 475397 Bytes = 464 kB = 0 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK An then no further output :-( I also tried, that with 2.4.4-Sources from ftp.denx.de (linux-2.4.4-2002-03-21.tar.bz2) but still the same problem. And i also downloaded the kernel image to 02840000 which ist the base adress of my flash memory, looks the same. And i also checked the following sentences in the README: <snip> Just make sure your machine specific header file (for instance include/asm-ppc/tqm8xx.h) includes the same definition of the Board Information structure as we define in include/ppcboot.h, and make sure that your definition of IMAP_ADDR uses the same value as your PPCBoot configuration in CFG_IMMR. <snip> But i have still problems at this point. can somebody help me? Sorry if that is a newbie question.. thanks in advance, Sven ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
