On Sunday 04 February 2001 13:49, Paul Ruhland wrote: > Steve, > > I will send you the changes for the MBX860 in another reply tomorrow ( > 20010205 ). All of that code is presently on my work machine. >
I managed to find an a patch for the pcmcia-cs-3.1.22 I made for the mbx. I only have code for the 'voltage_set' function in this patch. You should be able to use this as a starting point for changes to pcmcia-cs-3.1.24...this was done hastily and the hardware_enable, hardware_disable should probably be implemented and the voltage_set could use some work. I believe this got it up and running...I was able to use a 3Com LAN card ( 3c589_cs driver ). Also, this patch doesn't include the irq stuff I mention in my previous reply. I then abandoned the MBX in favor of an STK/TQM850L board from Denx Software Engineering/TQ Components ( http://www.denx.de ) for various reasons. For embedded mpc8xx development, I strongly recommend the STK/TQM boards and PPCBOOT bootloader/monitor..outstanding hardware, software, support, and documentation. ------------------------------- Paul Ruhland Micrwave Data Systems Inc. 175 Science Parkway Rochester, NY 14620 TEL: +1.716.242.8372 EMAIL: pruhland at microwavedata.com ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
