Hi, all Just to let everyone know that new software is available for bdi2000. Most of you probably got an e-mail from Abatron. If you did not install it -- do it now. One of the things it gives you is routing of target serial through to the telnet session. No more running from your PC to the target machine to see what is happening on console! just add line SIO 7 9600 ; 7 -- telnet port, 9600 baud rate
in the [TARGET] section of the bdi2000 config file, connect target serial to the bdi2000 service port and reboot bdi2000. Then, on your machine run telnet <bdi2000 ip> 7 and it all works! /************************/ Rudolf Ladyzhenskii DSP Engineer Advanced Communication Technologies ph. +61 3 8080 8215 fax. +61 3 9672 8800 Level 9, 190 Queen Street, Melbourne, 3000 Australia /***********************/ ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
