Look at the board information structure you are passing to linux. hh2.0 is expecting the cpu clock in HZ. Look at commproc.c in arch/ppc/8260_io to see how the cpu freq is used for baud rates.
> David Petersen > g GE Medical Systems > Information Technologies > ________________________________ > David T Petersen > Engineer, Clinical Information Systems > 8200 W. Tower Avenue > Milwaukee, WI 53223 > Phone: 414-362-2565 Fax: 414-362--2676 > Mailto:david.petersen at med.ge.com > Visit Us On The Internet: http://www.gemedicalsystems.com > -----Original Message----- From: Kevin Fry [mailto:[EMAIL PROTECTED] Sent: Friday, August 17, 2001 2:16 PM To: linuxppc emb3dd3d list Subject: HZ to MHZ, 2.4.2 kernel I remember someone having a problem with the kernel using hz and expecting MHZ or the other way around and it seems I'm running into this problem right now. Are there any patches or anything that address this issue with regards to the 8260 serial and also the time.c code? This is in HHL 2.0, 2.4.2 kernel Thanks! Kevin Fry ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
