I saw this during a flurry of work on MVME2400 and MVME5100 boards. I can't tell you if it was a kernel version problem or a config problem, but it has since gone away. Go through your .config with a FINE tooth comb and make sure everything looks good. Then try a different kernel version. Oh also just make sure you are using the correct boot image and are flashing the whole image! I have gotten bit by the copy and paste bug where my kernel size changed and I stopped FLASHing the whole image. Just a few thoughts.
On Wednesday 29 August 2001 10:50 pm, you wrote: I use MCP750,linuxppc_2_4 from penguinppc. I rebuild the kernel,and can boot the board via NFS correctly. But when I fill kernel in Bank A(ff000000,onboard flash) and use ROMBoot, it appears: Linux/PPC load: root=nfs rw ip=on Uncompressing Linux...inflate returned FFFFFFFD exit my kernel is about 840k,is it too big? I realy thank the mailing list and the person who answer me.They give me great help. -- Brian Waite Looking for a TeraFLOP in a closet www.fastcluster.com ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
