hello every one! when I debug the u-boot with bdi2000 ,I set the break point at
the
board_init_r but it cannot stop there. I do this as fellow: 1.symbol-file
2.add-symbol-file u-boot address 3.b board_init_r 4. c The address is which
u-boot reloaded itself to.I get the addrees by printing before u-boot
relocated. what's more,IT can stop when I set the hard break point there!
please help me !thanks!
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20050530/a9f3f139/attachment.htm
