In message <1088671264.6226.59.camel at lucy.pep-kaufbeuren.de> Stefan Nickl wrote: > On Mon, 2004-06-21 at 18:20, Kate Alhola wrote: > > >Are you really sure? Maybe it was just an issue of finding the right > > >jumper settings (which is non-trivial). We tested both with Rev. 4.0 > > >and Rev. 5.0 cards, and didn't need -12V. ... > seems I'm also stuck with this non-trivial problem here. > I have a Rev.5 card, and just discovered the three jumpers > to override the analog MUX (J250-252). > > I get a picture now, but it's *very* dim, and the colors > seem not quite right when the CRT's brightness is . > > Are there any more jumpers to set or could this be an > issue with the driver (linuxppc_2_4_devel -Dyesterday)? > Or maybe is the MUXer also a neccessary booster?
I've updated the table to include the settings for the Rev. 4.0 board, too, and to list ALL jumpers on the board. > OK. Please see http://www.denx.de/twiki/bin/view/DULG/CoralPInstallation Hope this helps. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de America has been discovered before, but it has always been hushed up. - Oscar Wilde ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
