Hello Robert, > > well, the linuxppc-2.5 bk pull from bkbits.net compiles and boots on > our 8xx board. although i'm still working on relocating SMC1 to allow > ethernet on SCC3. but other than that, sure, it builds and boots. > I'm using here a MPC852T with SMC1 and SCC3. Attached is part of an private patch against linuxppc-2.5. Its used on our board (CONFIG_SHMC) and there are some hardcoded values, but you could try...
/* * The relocation address must match with the * port address that is used in the driver table[]! * reloc. addr | table.port * (offset in dpmem) | (offset in dparam) * 0x1FC0 | 0x03C0 <---- hardcoded */ Regards, Torsten -------------- next part -------------- A non-text attachment was scrubbed... Name: SMC1_SCC3.patch Type: application/octet-stream Size: 4060 bytes Desc: not available Url : http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20040726/0504a154/attachment.obj
