I have an 852t board with 2.4.19 running. It uses smc1, scc3 and scc4. I used a stock configuration so that smc2 comes up as though it were present and is tts/1. But I made no modifications to the kernel and there were no conflicts.
Are you trying to use a microcode patch? If so, tell us which one(s) The whole 8xx microcode patch issue went through a big discussion a couple of months ago. Mark Chambers wvcomputronics.com ----- Original Message ----- From: ? ?? To: Linuxppc-embedded at ozlabs.org Sent: Wednesday, December 01, 2004 9:13 PM Subject: [micropatch]mpc852t I use proting linux2.4.18 in mpc852t. I found overlay smc1 and scc3 in dpram paramater. I try to micropatch mpc852t. but it didn't Let's me know how to use micropatch. Thank you for reading a mail. from cs. kim. _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded at ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
