Hi, On Thursday 02 December 2004 09:25, Gerhard Jaeger wrote: > On Thursday 02 December 2004 09:14, Kumar Gala wrote: > > Fun with mailers. Try this url: > > > > http://tinyurl.com/6skww > > Thanks that works (I mean the URL ;) > I have not tested, but this might will work, as I noticed, that when > addidionally CONFIG_RARP is enabled, there are also no problems. > > Anyway, I'll test ASAP and will tell you the results.
I've now applied this ipconfig patch and removed my piece of code and: it works - so ignore my patch ;) Thanx, Gerhard > > Thanx so far, > Gerhard > > > - kumar > > > > On Dec 2, 2004, at 2:07 AM, Gerhard Jaeger wrote: > > > Hi, > > > > > > On Wednesday 01 December 2004 23:19, Kumar Gala wrote: > > > > There is some belief that the following patch should fix the issue: > > > > > > > > http://linux.bkbits.net:8080/linux-2.5/cset at 1.2249.2.2? > > > > > > nav=index.html|ChangeSet at -3d > > > > > > > I would be interested to know if this helps w/o your patch. > > > > > > I'd like to cross-check this, but are you sure, you're referencing the > > > correct > > > changeset? Currently I only got: > > > Error 500 > > > Unable to find revision 1.2249.2.2 > > > > > > Gerhard > > > > > > > - kumar > > > > > > > > On Dec 1, 2004, at 10:07 AM, Gerhard Jaeger wrote: > > > > > Hi, > > > > > > > > > > this patch fixes an issue, that occurs on my MPC8541CDS, when > > > > > > trying to > > > > > > > > use bootp to get the IP parameters. It seems, that the patch > > > > > > only > > > > > > > > cures > > > > > the symptom but obviously not the cause ;) > > > > > > > > > > Signed-off-by: Gerhard Jaeger <gjaeger at sysgo.com> > > > > > > > > > > --- linux-2.6.10-rc2-mm4/drivers/net/gianfar.c.orig > > > > > > 2004-11-15 > > > > > > > > 02:26:34.000000000 +0100 > > > > > > > > > > +++ linux-2.6.10-rc2-mm4/drivers/net/gianfar.c 2004-12-01 > > > > > > > > > > 17:00:19.000000000 +0100 > > > > > > > > > > @@ -1477,6 +1477,9 @@ static void gfar_phy_change(void *data) > > > > > struct gfar_private *priv = netdev_priv(dev); > > > > > > > > > > int result = 0; > > > > > > > > > > > > > > > + if( !priv->mii_info->phyinfo ) > > > > > + return; > > > > > + > > > > > /* Delay to give the PHY a chance to change the > > > > > * register state */ > > > > > > > > > > msleep(1); -- Gerhard Jaeger g.jaeger at sysgo.com SYSGO AG Embedded and Real-Time Software www.sysgo.com | www.elinos.com | www.osek.de | www.imerva.com
