Hello Wolfgang, >Now what? Is it a custom board, or a Lite5200?
My apologies. It is a custom board based closely on the design of the Lite5200. Thus we are able to put a PCI1520 chip on the same PCB and connect it to the MPC5200 PCI bus. >U-Boot 1.1.1 is old. You better use current code (top of CVS). > >ELDK 2.1 is extremely old. You better use a current version (3.1). Agreed, they are old, although I was hoping to be more certain that the age of the toolchain was a problem first. I have tried top-of-CVS UBOOT, but reverted when no evident improvement occurred. >What's you PCMCIA config file looking like? Under /etc/sysconfig/pcmcia: PCMCIA=yes PCIC=yenta_socket PCIC_OPTS= CORE_OPTS= CARDMGR_OPTS= Under /etc/pcmcia/config.opts... (This is as how I found it, although I added the 4th port address and changed the memory range in an attempt to get it to cooperate. I/O resources aren't even being detected, so I tried adding 0x50000000 to each I/O port address in yenta.c and adding the same value to each I/O here to no avail): include port 0x100-0x4ff, port 0x800-0x8ff, port 0xc00-0xcff, port 0x1000-0x10ff include memory 0x40000000-0x40001fff include port 0xa00-0xaff exclude irq 4 exclude irq 7 module "ray_cs" opts "essid=ADHOC_ESSID hop_dwell=128 beacon_period=256 translate=1" Help with respect to getting the interrupts and anything further (configuration files and more) is appreciated, although for the sake of keeping on topic, I can send any Card Services-based queries to the pcmcia-cs mailing list if so desired :-)
